i use radius -X to see the log, it looks like: Ignoring request to authentication address * port 1812 from unknown client 123.116.121.228 port 56627 Ready to process requests. Ignoring request to authentication address * port 1812 from unknown client 123.116.121.228 port 56627 Ready to process requests.
2010/6/8 Spacelee <[email protected]> > what should i write in client.conf > > mine is like this: > client fremont.iqwer.com { > ipaddr = 173.233.234.52 > shortname = fremont > secret = 19861230 > nastype = other > } > > 2010/6/8 Spacelee <[email protected]> > >> on the radius server, i type the two command , and get those results, the >> iptables has been shutdown >> >> >> radtest test test localhost 1812 19861230 >> Sending Access-Request of id 124 to 127.0.0.1 port 1812 >> User-Name = "test" >> User-Password = "test" >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 1812 >> rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=124, >> length=20 >> >> >> radtest test test 173.224.212.50 1812 19861230 >> Sending Access-Request of id 236 to 173.234.232.50 port 1812 >> User-Name = "test" >> User-Password = "test" >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 1812 >> Sending Access-Request of id 236 to 173.224.212.50 port 1812 >> User-Name = "test" >> User-Password = "test" >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 1812 >> Sending Access-Request of id 236 to 173.224.212.50 port 1812 >> User-Name = "test" >> User-Password = "test" >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 1812 >> radclient: no response from server for ID 236 socket 3 >> >> >> 2010/6/8 Spacelee <[email protected]> >> >>> this is the file users' content >>> test Auth-Type:=MS-CHAP, User-Password:="test", Simultaneous-Use:=100 >>> Service-Type = Framed-User, >>> Framed-Protocol = PPP, >>> Framed-IP-Address = 255.255.255.254, >>> Framed-IP-Netmask = 255.255.255.0 >>> >>> >>> >>> 2010/6/8 Spacelee <[email protected]> >>> >>> i use netstat and found there is radius listen on 1812, 1813 and 1814 >>>> using udp >>>> i shut down all the iptables both on the server of pptp and the server >>>> radius >>>> >>>> but the pptp can't be authenticated , the log is >>>> >>>> RADIUS plugin initialized. >>>> Jun 8 15:26:29 mountainview pppd[4604]: Plugin >>>> /usr/lib64/pppd/2.4.4/radattr.so loaded. >>>> Jun 8 15:26:29 mountainview pppd[4604]: RADATTR plugin initialized. >>>> Jun 8 15:26:29 mountainview pppd[4604]: Plugin >>>> /usr/lib64/pptpd/pptpd-logwtmp.so loaded. >>>> Jun 8 15:26:29 mountainview pppd[4604]: pptpd-logwtmp: $Version$ >>>> Jun 8 15:26:29 mountainview pppd[4604]: pppd 2.4.4 started by root, uid >>>> 0 >>>> Jun 8 15:26:29 mountainview pppd[4604]: Using interface ppp0 >>>> Jun 8 15:26:29 mountainview pppd[4604]: Connect: ppp0 <--> /dev/pts/1 >>>> Jun 8 15:27:03 mountainview pppd[4604]: rc_send_server: no reply from >>>> RADIUS server puppet:1812 >>>> Jun 8 15:27:03 mountainview pppd[4604]: Peer test failed CHAP >>>> authentication >>>> Jun 8 15:27:03 mountainview pppd[4604]: Connection terminated. >>>> Jun 8 15:27:03 mountainview pppd[4604]: Exit. >>>> >>>> >>>> it says there is not reply >>>> >>>> 2010/6/8 Alan Buxey <[email protected]> >>>> >>>> Hi, >>>>> > i can start freeradius ok, but my pptp can't remote access radius >>>>> server, I telnet 1812 or 1813 , but both are connection refused, i don't >>>>> know what to do with this situation >>>>> >>>>> firewall eg iptables , on the server you put freeradius on? >>>>> >>>>> alan >>>>> - >>>>> List info/subscribe/unsubscribe? See >>>>> http://www.freeradius.org/list/users.html >>>>> >>>> >>>> >>>> >>>> -- >>>> Spacelee >>>> >>> >>> >>> >>> -- >>> Spacelee >>> >> >> >> >> -- >> Spacelee >> > > > > -- > Spacelee > -- Spacelee
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
