Are you by chance testing the FreeRADIUS ready version of Alvarion's BTS firmware?
> -----Original Message----- > From: freeradius-users- > [email protected] > [mailto:freeradius-users- > [email protected]] On Behalf Of > David Peterson > Sent: Friday, July 09, 2010 1:14 PM > To: 'FreeRadius users mailing list' > Subject: RE: Accounting and SQL > > To answer my question, the NAS was not sending any data and is now > fixed and > sending accounting. > > David > > -----Original Message----- > From: > freeradius-users-bounces+david.peterson=acc- > [email protected] > [mailto:freeradius-users-bounces+david.peterson=acc- > [email protected] > s.org] On Behalf Of David Peterson > Sent: Friday, July 09, 2010 9:02 AM > To: 'FreeRadius users mailing list' > Subject: Accounting and SQL > > I have accounting and SQL set up (probably broken). I see the debug > showing > it updating table radacct but the table remains empty. > > r...@ubuntu:/usr/local/etc/raddb# radiusd -X > FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun 21 > 2010 > at 14:47:46 > Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE. > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License v2. > Starting - reading configuration files ... > including configuration file /usr/local/etc/raddb/radiusd.conf > including configuration file /usr/local/etc/raddb/proxy.conf > including configuration file /usr/local/etc/raddb/clients.conf > including configuration file > /usr/local/etc/raddb/sites-available/dynamic-clients > including files in directory /usr/local/etc/raddb/modules/ > including configuration file /usr/local/etc/raddb/modules/passwd > including configuration file /usr/local/etc/raddb/modules/mac2vlan > including configuration file /usr/local/etc/raddb/modules/policy > including configuration file /usr/local/etc/raddb/modules/wimax > including configuration file /usr/local/etc/raddb/modules/ippool > including configuration file /usr/local/etc/raddb/modules/radutmp > including configuration file /usr/local/etc/raddb/modules/smsotp > including configuration file /usr/local/etc/raddb/modules/echo > including configuration file /usr/local/etc/raddb/modules/expr > including configuration file /usr/local/etc/raddb/modules/pam > including configuration file /usr/local/etc/raddb/modules/inner-eap > including configuration file /usr/local/etc/raddb/modules/logintime > including configuration file /usr/local/etc/raddb/modules/ldap > including configuration file /usr/local/etc/raddb/modules/pap > including configuration file /usr/local/etc/raddb/modules/ntlm_auth > including configuration file /usr/local/etc/raddb/modules/preprocess > including configuration file /usr/local/etc/raddb/modules/unix > including configuration file /usr/local/etc/raddb/modules/attr_rewrite > including configuration file /usr/local/etc/raddb/modules/etc_group > including configuration file /usr/local/etc/raddb/modules/linelog > including configuration file > /usr/local/etc/raddb/modules/sqlcounter_expire_on_login > including configuration file /usr/local/etc/raddb/modules/digest > including configuration file /usr/local/etc/raddb/modules/otp > including configuration file /usr/local/etc/raddb/modules/realm > including configuration file /usr/local/etc/raddb/modules/acct_unique > including configuration file /usr/local/etc/raddb/modules/attr_filter > including configuration file /usr/local/etc/raddb/modules/perl > including configuration file /usr/local/etc/raddb/modules/krb5 > including configuration file /usr/local/etc/raddb/modules/checkval > including configuration file /usr/local/etc/raddb/modules/files > including configuration file /usr/local/etc/raddb/modules/cui > including configuration file /usr/local/etc/raddb/modules/exec > including configuration file /usr/local/etc/raddb/modules/expiration > including configuration file /usr/local/etc/raddb/modules/smbpasswd > including configuration file /usr/local/etc/raddb/modules/detail.log > including configuration file /usr/local/etc/raddb/modules/mschap > including configuration file /usr/local/etc/raddb/modules/sradutmp > including configuration file /usr/local/etc/raddb/modules/counter > including configuration file /usr/local/etc/raddb/modules/mac2ip > including configuration file /usr/local/etc/raddb/modules/detail > including configuration file > /usr/local/etc/raddb/modules/detail.example.com > including configuration file /usr/local/etc/raddb/modules/chap > including configuration file /usr/local/etc/raddb/modules/sql_log > including configuration file /usr/local/etc/raddb/modules/always > including configuration file /usr/local/etc/raddb/eap.conf > including configuration file /usr/local/etc/raddb/sql.conf > including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf > including configuration file > /usr/local/etc/raddb/sql/mysql/counter.conf > including configuration file /usr/local/etc/raddb/policy.conf > including files in directory /usr/local/etc/raddb/sites-enabled/ > including configuration file /usr/local/etc/raddb/sites-enabled/default > including configuration file > /usr/local/etc/raddb/sites-enabled/control-socket > including configuration file /usr/local/etc/raddb/sites-enabled/inner- > tunnel > main { > allow_core_dumps = no > } > including dictionary file /usr/local/etc/raddb/dictionary > main { > prefix = "/usr/local" > localstatedir = "/usr/local/var" > logdir = "/usr/local/var/log/radius" > libdir = "/usr/local/lib" > radacctdir = "/usr/local/var/log/radius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 1024 > pidfile = "/usr/local/var/run/radiusd/radiusd.pid" > checkrad = "/usr/local/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > } > security { > max_attributes = 200 > reject_delay = 1 > status_server = yes > } > } > radiusd: #### Loading Realms and Home Servers #### > realm WiMax.com { > } > radiusd: #### Loading Clients #### > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = "testing123" > nastype = "other" > } > client dynamic { > ipaddr = 192.168.0.0 > netmask = 16 > require_message_authenticator = no > dynamic_clients = "dynamic_client_server" > lifetime = 86400 > } > radiusd: #### Instantiating modules #### > instantiate { > Module: Linked to module rlm_exec > Module: Instantiating exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > } > Module: Linked to module rlm_expr > Module: Instantiating expr > Module: Linked to module rlm_expiration > Module: Instantiating expiration > expiration { > reply-message = "Password Has Expired " > } > Module: Linked to module rlm_logintime > Module: Instantiating logintime > logintime { > reply-message = "You are calling outside your allowed timespan > " > minimum-timeout = 60 > } > } > radiusd: #### Loading Virtual Servers #### > server dynamic_client_server { > modules { > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_always > Module: Instantiating ok > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > } # modules > } # server > server inner-tunnel { > modules { > Module: Checking authenticate {...} for more modules to load > Module: Linked to module rlm_pap > Module: Instantiating pap > pap { > encryption_scheme = "auto" > auto_header = no > } > Module: Linked to module rlm_chap > Module: Instantiating chap > Module: Linked to module rlm_mschap > Module: Instantiating mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = no > } > Module: Linked to module rlm_unix > Module: Instantiating unix > unix { > radwtmp = "/usr/local/var/log/radius/radwtmp" > } > Module: Linked to module rlm_eap > Module: Instantiating eap > eap { > default_eap_type = "md5" > timer_expire = 60 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 4096 > } > Module: Linked to sub-module rlm_eap_md5 > Module: Instantiating eap-md5 > Module: Linked to sub-module rlm_eap_leap > Module: Instantiating eap-leap > Module: Linked to sub-module rlm_eap_gtc > Module: Instantiating eap-gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > Module: Linked to sub-module rlm_eap_tls > Module: Instantiating eap-tls > tls { > rsa_key_exchange = no > dh_key_exchange = yes > rsa_key_length = 512 > dh_key_length = 512 > verify_depth = 0 > pem_file_type = yes > private_key_file = "/usr/local/etc/raddb/certs/server.pem" > certificate_file = "/usr/local/etc/raddb/certs/server.pem" > CA_file = "/usr/local/etc/raddb/certs/ca.pem" > private_key_password = "whatever" > dh_file = "/usr/local/etc/raddb/certs/dh" > random_file = "/usr/local/etc/raddb/certs/random" > fragment_size = 1024 > include_length = yes > check_crl = no > cipher_list = "DEFAULT" > make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" > cache { > enable = no > lifetime = 24 > max_entries = 255 > } > } > Module: Linked to sub-module rlm_eap_ttls > Module: Instantiating eap-ttls > ttls { > default_eap_type = "md5" > copy_request_to_tunnel = yes > use_tunneled_reply = yes > virtual_server = "inner-tunnel" > include_length = yes > } > Module: Linked to sub-module rlm_eap_peap > Module: Instantiating eap-peap > peap { > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > } > Module: Linked to sub-module rlm_eap_mschapv2 > Module: Instantiating eap-mschapv2 > mschapv2 { > with_ntdomain_hack = no > } > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_realm > Module: Instantiating suffix > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > Module: Linked to module rlm_files > Module: Instantiating files > files { > usersfile = "/usr/local/etc/raddb/users" > acctusersfile = "/usr/local/etc/raddb/acct_users" > preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" > compat = "no" > } > Module: Linked to module rlm_sql > Module: Instantiating sql > sql { > driver = "rlm_sql_mysql" > server = "localhost" > port = "" > login = "root" > password = "unl0ck" > radius_db = "radius" > read_groups = yes > sqltrace = no > sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" > readclients = no > deletestalesessions = yes > num_sql_socks = 5 > lifetime = 0 > max_queries = 0 > sql_user_name = "%{User-Name}" > default_user_profile = "" > nas_query = "SELECT id, nasname, shortname, type, secret, > server > FROM nas" > authorize_check_query = "SELECT id, username, attribute, value, > op FROM radcheck WHERE username = BINARY > '%{SQL-User-Name}' ORDER BY id" > authorize_reply_query = "SELECT id, username, attribute, value, > op FROM radreply WHERE username = BINARY > '%{SQL-User-Name}' ORDER BY id" > authorize_group_check_query = "SELECT id, groupname, > attribute, Value, op FROM radgroupcheck > WHERE > groupname = '%{Sql-Group}' ORDER BY id" > authorize_group_reply_query = "SELECT id, groupname, > attribute, value, op FROM radgroupreply > WHERE > groupname = '%{Sql-Group}' ORDER BY id" > accounting_onoff_query = " UPDATE radacct > SET acctstoptime = '%S', > acctsessiontime > = unix_timestamp('%S') - > unix_timestamp(acctstarttime), acctterminatecause = > '%{Acct-Terminate-Cause}', acctstopdelay = > %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL > AND > nasipaddress = '%{NAS-IP-Address}' AND acctstarttime > <= > '%S'" > accounting_update_query = " UPDATE radacct > SET framedipaddress = '%{Framed-IP-Address}', > acctsessiontime = '%{Acct-Session-Time}', > acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 > | > '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = > '%{%{Acct-Output-Gigawords}:-0}' << 32 > | > '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = > '%{Acct-Session-Id}' AND username = > '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" > accounting_update_query_alt = " INSERT INTO > radacct (acctsessionid, acctuniqueid, > username, realm, nasipaddress, > nasportid, nasporttype, acctstarttime, > acctsessiontime, acctauthentic, connectinfo_start, > acctinputoctets, acctoutputoctets, calledstationid, > callingstationid, servicetype, framedprotocol, > framedipaddress, acctstartdelay, > xascendsessionsvrkey) VALUES ('%{Acct-Session- > Id}', > '%{Acct-Unique-Session-Id}', '%{SQL-User- > Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', > '%{NAS-Port-Type}', DATE_SUB('%S', > INTERVAL (%{%{Acct-Session-Time}:-0} + > %{%{Acct-Delay-Time}:-0}) SECOND), > '%{Acct-Session-Time}', '%{Acct-Authentic}', > '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | > '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output- > Gigawords}:-0}' > << 32 | '%{%{Acct-Output-Octets}:-0}', > '%{Called-Station-Id}', '%{Calling-Station-Id}', > '%{Service-Type}', '%{Framed-Protocol}', > '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr- > Key}')" > accounting_start_query = " INSERT INTO > radacct > (acctsessionid, acctuniqueid, username, > realm, nasipaddress, nasportid, > nasporttype, acctstarttime, acctstoptime, > acctsessiontime, acctauthentic, connectinfo_start, > connectinfo_stop, acctinputoctets, acctoutputoctets, > calledstationid, callingstationid, acctterminatecause, > servicetype, framedprotocol, framedipaddress, > acctstartdelay, acctstopdelay, xascendsessionsvrkey) > VALUES ('%{Acct-Session-Id}', > '%{Acct-Unique-Session-Id}', '%{SQL-User- > Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', > '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', > '%{Connect-Info}', '', '0', '0', > '%{Called-Station-Id}', '%{Calling-Station-Id}', '', > '%{Service-Type}', '%{Framed-Protocol}', > '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', > '%{X-Ascend-Session-Svr-Key}')" > accounting_start_query_alt = " UPDATE radacct > SET acctstarttime = '%S', > acctstartdelay = > '%{%{Acct-Delay-Time}:-0}', connectinfo_start = > '%{Connect-Info}' WHERE acctsessionid = > '%{Acct-Session-Id}' AND username = > '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP- > Address}'" > accounting_stop_query = " UPDATE radacct > SET > acctstoptime = '%S', acctsessiontime = > '%{Acct-Session-Time}', acctinputoctets = > '%{%{Acct-Input-Gigawords}:-0}' << 32 > | > '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = > '%{%{Acct-Output-Gigawords}:-0}' << 32 > | > '%{%{Acct-Output-Octets}:-0}', acctterminatecause = > '%{Acct-Terminate-Cause}', acctstopdelay = > '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = > '%{Connect-Info}' WHERE acctsessionid = > '%{Acct-Session-Id}' AND username = > '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP- > Address}'" > accounting_stop_query_alt = " INSERT INTO > radacct (acctsessionid, acctuniqueid, > username, > realm, nasipaddress, nasportid, nasporttype, > acctstarttime, > acctstoptime, acctsessiontime, acctauthentic, > connectinfo_start, connectinfo_stop, acctinputoctets, > acctoutputoctets, calledstationid, callingstationid, > acctterminatecause, servicetype, framedprotocol, > framedipaddress, acctstartdelay, acctstopdelay) > VALUES ('%{Acct-Session-Id}', > '%{Acct-Unique-Session-Id}', '%{SQL-User- > Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', > '%{NAS-Port-Type}', DATE_SUB('%S', > INTERVAL > (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:- > 0}) > SECOND), '%S', '%{Acct-Session-Time}', '%{Acct- > Authentic}', > '', '%{Connect-Info}', > '%{%{Acct-Input-Gigawords}:-0}' << 32 | > '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output- > Gigawords}:-0}' > << 32 | '%{%{Acct-Output-Octets}:-0}', > '%{Called-Station-Id}', '%{Calling-Station-Id}', > '%{Acct-Terminate-Cause}', '%{Service-Type}', > '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', > '%{%{Acct-Delay-Time}:-0}')" > group_membership_query = "SELECT groupname FROM > radusergroup WHERE username = BINARY '%{SQL-User- > Name}' > ORDER BY priority" > connect_failure_retry_delay = 60 > simul_count_query = "" > simul_verify_query = "SELECT radacctid, acctsessionid, > username, nasipaddress, nasportid, > framedipaddress, callingstationid, > framedprotocol FROM radacct > WHERE username = > '%{SQL-User-Name}' AND acctstoptime IS > NULL" > postauth_query = "INSERT INTO > radpostauth > (username, pass, reply, authdate) VALUES > ( '%{User-Name}', > '%{%{User-Password}:-%{Chap-Password}}', > '%{reply:Packet-Type}', '%S')" > safe-characters = > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" > } > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and > linked > rlm_sql (sql): Attempting to connect to r...@localhost:/radius > rlm_sql (sql): starting 0 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 > rlm_sql_mysql: Starting connect to MySQL server for #0 > rlm_sql (sql): Connected new DB handle, #0 > rlm_sql (sql): starting 1 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 > rlm_sql_mysql: Starting connect to MySQL server for #1 > rlm_sql (sql): Connected new DB handle, #1 > rlm_sql (sql): starting 2 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 > rlm_sql_mysql: Starting connect to MySQL server for #2 > rlm_sql (sql): Connected new DB handle, #2 > rlm_sql (sql): starting 3 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 > rlm_sql_mysql: Starting connect to MySQL server for #3 > rlm_sql (sql): Connected new DB handle, #3 > rlm_sql (sql): starting 4 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 > rlm_sql_mysql: Starting connect to MySQL server for #4 > rlm_sql (sql): Connected new DB handle, #4 > Module: Checking session {...} for more modules to load > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > Module: Linked to module rlm_attr_filter > Module: Instantiating attr_filter.access_reject > attr_filter attr_filter.access_reject { > attrsfile = "/usr/local/etc/raddb/attrs.access_reject" > key = "%{User-Name}" > } > } # modules > } # server > server { > modules { > Module: Checking authenticate {...} for more modules to load > Module: Instantiating attr_filter.access_challenge > attr_filter attr_filter.access_challenge { > attrsfile = "/usr/local/etc/raddb/attrs.access_challenge" > key = "%{User-Name}" > } > Module: Instantiating handled > always handled { > rcode = "handled" > simulcount = 0 > mpp = no > } > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_preprocess > Module: Instantiating preprocess > preprocess { > huntgroups = "/usr/local/etc/raddb/huntgroups" > hints = "/usr/local/etc/raddb/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > Module: Linked to module rlm_wimax > Module: Instantiating wimax > wimax { > delete_mppe_keys = yes > } > Module: Checking preacct {...} for more modules to load > Module: Linked to module rlm_acct_unique > Module: Instantiating acct_unique > acct_unique { > key = "User-Name, Acct-Session-Id, NAS-IP-Address, > Client-IP-Address, NAS-Port" > } > Module: Checking accounting {...} for more modules to load > Module: Linked to module rlm_radutmp > Module: Instantiating radutmp > radutmp { > filename = "/usr/local/var/log/radius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > perm = 384 > callerid = yes > } > Module: Instantiating attr_filter.accounting_response > attr_filter attr_filter.accounting_response { > attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" > key = "%{User-Name}" > } > Module: Checking session {...} for more modules to load > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > } # modules > } # server > radiusd: #### Opening IP addresses and Ports #### > listen { > type = "auth" > ipaddr = * > port = 0 > } > listen { > type = "acct" > ipaddr = * > port = 0 > } > listen { > type = "control" > listen { > socket = "/usr/local/var/run/radiusd/radiusd.sock" > } > } > Listening on authentication address * port 1812 > Listening on accounting address * port 1813 > Listening on command file /usr/local/var/run/radiusd/radiusd.sock > Listening on proxy address * port 1814 > Ready to process requests. > rad_recv: Access-Request packet from host 192.168.60.50 port 49154, > id=22, > length=163 > server dynamic_client_server { > rlm_sql (sql): Reserving sql socket id: 4 > rlm_sql (sql): Released sql socket id: 4 > rlm_sql (sql): Reserving sql socket id: 3 > rlm_sql (sql): Released sql socket id: 3 > rlm_sql (sql): Reserving sql socket id: 2 > rlm_sql (sql): Released sql socket id: 2 > rlm_sql (sql): Reserving sql socket id: 1 > rlm_sql (sql): Released sql socket id: 1 > } # server dynamic_client_server > - Added client 192.168.60.50 with shared secret unl0ck > rad_recv: Access-Request packet from host 192.168.60.50 port 49154, > id=22, > length=163 > User-Name = "KeepAliveUserNameAndPassword" > NAS-IP-Address = 192.168.60.50 > NAS-Port-Type = 27 > NAS-Port = 0 > Calling-Station-Id = "\000\000\000\000\000" > NAS-Identifier = "001001001000032000" > WiMAX-GMT-Timezone-offset = 0 > Acct-Session-Id = "KeepAliveSessionId" > User-Password = "KeepAliveUserNameAndPassword" > +- entering group authorize {...} > ++[preprocess] returns ok > ++[mschap] returns noop > rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-00-00-00-00-00 > ++[wimax] returns ok > [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking > up > realm NULL > [suffix] No such realm "NULL" > ++[suffix] returns noop > [eap] No EAP-Message, not doing EAP > ++[eap] returns noop > ++[files] returns noop > [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword > [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' > rlm_sql (sql): Reserving sql socket id: 0 > [sql] expand: SELECT id, username, attribute, value, op FROM > radcheck WHERE username = BINARY '%{SQL-User-Name}' > ORDER > BY id -> SELECT id, username, attribute, value, op FROM > radcheck WHERE username = BINARY > 'KeepAliveUserNameAndPassword' ORDER BY id > [sql] User found in radcheck table > [sql] expand: SELECT id, username, attribute, value, op FROM > radreply WHERE username = BINARY '%{SQL-User-Name}' > ORDER > BY id -> SELECT id, username, attribute, value, op FROM > radreply WHERE username = BINARY > 'KeepAliveUserNameAndPassword' ORDER BY id > [sql] expand: SELECT groupname FROM radusergroup > WHERE > username = BINARY '%{SQL-User-Name}' ORDER BY priority -> > SELECT > groupname FROM radusergroup WHERE username = BINARY > 'KeepAliveUserNameAndPassword' ORDER BY priority > rlm_sql (sql): Released sql socket id: 0 > ++[sql] returns ok > ++[expiration] returns noop > ++[logintime] returns noop > WARNING: Please update your configuration, and remove 'Auth-Type = > Local' > WARNING: Use the PAP or CHAP modules instead. > User-Password in the request is correct. > +- entering group post-auth {...} > [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword > [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' > [sql] expand: %{User-Password} -> KeepAliveUserNameAndPassword > [sql] expand: INSERT INTO radpostauth > (username, > pass, reply, authdate) VALUES > ( '%{User-Name}', > '%{%{User-Password}:-%{Chap-Password}}', > '%{reply:Packet-Type}', '%S') -> INSERT INTO > radpostauth (username, pass, reply, > authdate) VALUES ( > 'KeepAliveUserNameAndPassword', > 'KeepAliveUserNameAndPassword', > 'Access-Accept', '2010-07-08 16:11:46') > rlm_sql (sql) in sql_postauth: query is INSERT INTO > radpostauth (username, pass, reply, > authdate) VALUES ( > 'KeepAliveUserNameAndPassword', > 'KeepAliveUserNameAndPassword', 'Access- > Accept', > '2010-07-08 16:11:46') > rlm_sql (sql): Reserving sql socket id: 4 > rlm_sql (sql): Released sql socket id: 4 > ++[sql] returns ok > ++[exec] returns noop > expand: %{User-Name} -> KeepAliveUserNameAndPassword > expand: %{EAP-MSK} -> > ++[reply] returns noop > [wimax] No EAP-MSK or EAP-EMSK. Cannot create WiMAX keys. > ++[wimax] returns noop > Sending Access-Accept of id 22 to 192.168.60.50 port 49154 > WiMAX-IP-Technology = CMIP4 > WiMAX-FA-RK-Key = 0x00 > WiMAX-MSK = 0x > Finished request 0. > Going to the next request > Waking up in 4.9 seconds. > rad_recv: Accounting-Request packet from host 192.168.60.50 port 49155, > id=14, length=135 > User-Name = "KeepAliveUserNameAndPassword" > NAS-IP-Address = 192.168.60.50 > NAS-Port-Type = 27 > NAS-Port = 0 > Calling-Station-Id = "\000\000\000\000\000" > NAS-Identifier = "001001001000032000" > WiMAX-GMT-Timezone-offset = 0 > Acct-Status-Type = Stop > Acct-Session-Id = "KeepAliveSessionId" > +- entering group preacct {...} > ++[preprocess] returns ok > expand: %{Acct-Session-Time} -> > ... expanding second conditional > expand: %{Acct-Delay-Time} -> > ... expanding second conditional > expand: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay- > Time}:-0} > -> 1278619906 - 0 - 0 > expand: %{expr: %l - %{%{Acct-Session-Time}:-0} - > %{%{Acct-Delay-Time}:-0}} -> 1278619906 > ++[request] returns ok > [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = > 192.168.60.50,NAS-IP-Address = 192.168.60.50,Acct-Session-Id = > "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' > [acct_unique] Acct-Unique-Session-ID = "3e3e3f7489ea6051". > ++[acct_unique] returns ok > [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking > up > realm NULL > [suffix] No such realm "NULL" > ++[suffix] returns noop > ++[files] returns noop > +- entering group accounting {...} > ++[unix] returns ok > [radutmp] expand: /usr/local/var/log/radius/radutmp -> > /usr/local/var/log/radius/radutmp > [radutmp] expand: %{User-Name} -> KeepAliveUserNameAndPassword > rlm_radutmp: Logout for NAS Extreme 5000 port 0, but no Login record > ++[radutmp] returns ok > [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword > [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' > [sql] expand: %{Acct-Input-Gigawords} -> > [sql] ... expanding second conditional > [sql] expand: %{Acct-Input-Octets} -> > [sql] ... expanding second conditional > [sql] expand: %{Acct-Output-Gigawords} -> > [sql] ... expanding second conditional > [sql] expand: %{Acct-Output-Octets} -> > [sql] ... expanding second conditional > [sql] expand: %{Acct-Delay-Time} -> > [sql] ... expanding second conditional > [sql] expand: UPDATE radacct SET > acctstoptime = '%S', acctsessiontime = > '%{Acct-Session-Time}', acctinputoctets = > '%{%{Acct-Input-Gigawords}:-0}' << 32 > | > '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = > '%{%{Acct-Output-Gigawords}:-0}' << 32 > | > '%{%{Acct-Output-Octets}:-0}', acctterminatecause = > '%{Acct-Terminate-Cause}', acctstopdelay = > '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = > '%{Connect-Info}' WHERE acctsessionid = > '%{Acct-Session-Id}' AND username = > '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP- > Address}' > -> UPDATE radacct SET acctstoptime = > '2010-07-08 16:11:46', acctsessiontime = > '', > acctinputoctets = '0' << 32 | > '0', acctoutputoctets = '0' << 32 | > rlm_sql (sql): Reserving sql socket id: 3 > [sql] expand: stop packet with zero session length. [user '%{User- > Name}', > nas '%{NAS-IP-Address}'] -> stop packet with zero session length. [user > 'KeepAliveUserNameAndPassword', nas '192.168.60.50'] > [sql] stop packet with zero session length. [user > 'KeepAliveUserNameAndPassword', nas '192.168.60.50'] > rlm_sql (sql): Released sql socket id: 3 > ++[sql] returns noop > ++? if (noop) > ? Evaluating (noop) -> TRUE > ++? if (noop) -> TRUE > ++- entering if (noop) {...} > +++[ok] returns ok > ++- if (noop) returns ok > [attr_filter.accounting_response] expand: %{User-Name} -> > KeepAliveUserNameAndPassword > attr_filter: Matched entry DEFAULT at line 12 > ++[attr_filter.accounting_response] returns updated > Sending Accounting-Response of id 14 to 192.168.60.50 port 49155 > Finished request 1. > Cleaning up request 1 ID 14 with timestamp +25 > Going to the next request > Waking up in 4.9 seconds. > Cleaning up request 0 ID 22 with timestamp +25 > Ready to process requests. > > David Peterson > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
