Omg... What a typo! :(
Been looking blind at this for like 4 hours... wow Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig [email protected] | Direkte: +45 69 10 60 18 | Tlf: +45 70 23 55 66 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Alan DeKok Sent: 28. september 2010 12:03 To: FreeRadius users mailing list Subject: Re: Problemers using Freeradius with Anyconnect.. Thomas Raabo - ZitCom A/S wrote: > The problem is that when I use Freeradius the ASA just don’t seem to > get the framed-ip-address or something… ( when we try to connect with > anyconnect it gives the error host or network is 0) with IAS the > right ip gets assigned and all just works You have configured FreeRADIUS to send back the wrong IP address. IAS is sending "...129". FreeRADIUS is sending "....128". The reason "128" doesn't work is that it's not a valid IP address for the network you configured. Change the configuration to make FreeRADIUS send back the same IP as IAS. RADIUS isn't complicated. You can make the Access-Accept from FreeRADIUS identical to the Access-Accept from IAS. Once that happens, the NAS will do the same thing for both servers. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
