On 06/01/11 12:48, Nagaraj Panyam wrote:
Dear experts,
I setup mac_auth as in the freeradius wiki and its not working, am
unable to debug further.
Hmm. This:
http://wiki.freeradius.org/index.php?title=Mac-Auth
...seems like it's a bit... over-engineered? if () unlang statements in
the "authenticate" section and calling a module .authorize method in
post-auth don't seem necessary?
Anyone who wrote the page, and why it uses that method?
requesting for help!
It correctly sets Auth-Type to CSID. but authorized_macs.authorize]
returns noop
I have pasted debug output and the relevant files below.
## Debug output of radiusd:
rad_recv: Access-Request packet from host 158.144.55.107 port 3072,
id=62, length=175
User-Name = "TEST\\test"
NAS-IP-Address = 158.144.55.107
NAS-Port = 0
Called-Station-Id = "001f1fd74ce9"
Calling-Station-Id = "001a734337c9"
NAS-Identifier = "Realtek Access Point. 8181"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps 802.11b"
EAP-Message = 0x0200000e01544553545c74657374
Message-Authenticator = 0x1b88a63d48cd003d10945139139bbcac
This is not a mac-auth request. It's an EAP request, likely from an
802.11 wireless point using WPA-Enterprise.
You can't mac-auth EAP.
Start by describing what you want to do please.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
