On 2/14/2011 01:07, Phil Mayers wrote:
On 02/13/2011 10:37 PM, Christ Schlacta wrote:
it seems to get to the same point (Finished request xxx.) and then
repeats the entire process four times (the same number of times
specified in my switch config) then fails to connect. I'm not sure if
I'm missing something, or what.. but it should all be fine, as this is
the same config I use for my wireless config. I'm certain I've missed
something obvious, and if you can provide any additional information to
point me in the right direction, I'd much appreciate it.
The client is stopping sending. This is almost always because it
doesn't trust the server cert. This is noted at length in eap.conf.
Ensure you have setup the wireless connection & client properly.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
That was one of the first things I checked, the root certificate is the
ONLY one checked in the windows 7 certificate dialogue. also, wireless
clients work with this exact setup (all of them!), but so far, this
wired client doesn't seem to want to.
I did eventually find a "sorta" fix. I had jumbo frames enabled,
disabling them fixed the problem temporarily. the problem has returned
in a different form now. the radius server doesn't even see the auth
requests now, and the client just won't even try to authenticate. I
think this qualifies as a different issue, that I need to pursue
separately. should I follow up here, or is it an issue I should contact
my switch manufacturer about, or is it a windows problem?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
