Looks like it got a bit further this time. If I am looking at this right, it got throught the TTLS part. But now what? The SM is just "Registering".
I am hoping that this is something simple and obvious to you guys... (Just the tail end for now): ... rad_recv: Access-Request packet from host 10.111.4.254 port 1273, id=0, length=439 Cleaning up request 4 ID 0 with timestamp +41 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf2937007f695654f did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "0a-00-3e-f0-11-34" State = 0xf2937007f695654f37c0362b1499c219 NAS-IP-Address = 10.111.4.254 NAS-Port = 5 NAS-Port-Type = Wireless-802.11 Framed-MTU = 1020 EAP-Message = 0x020601501580000001461603010106100001020100b208c439d0d90984cce915a82a4455cfcd9088e55760daeb8ff2e4b2bd5115bf3fe2b8e1270daf4dca4cf81a7392 bbf684e2de7147ef4b7bc5dd54a9dd5d682f77959c1b0d7b5af3e64835e4e0e8bc2c76da431b0ff2d36fb94cb4a964da32027c46c54ea060de1a75e0a9e9ad8fac1e810af9a6b82c9e37353afc4aab 0126e19f18d7e6d3998534e364fbeab676acb4eb98b71b3afdf5f850fda7b7d1952e67de3abff875519824c3bd7f91ea33a6e9db3b5132c4947a9128c156f20b809211586ba7961c20edcb9e1bbc81 818b25c499288cd11014ea181eb05c2e0fd566a41121df762993fd0a EAP-Message = 0x10d47398e6dfe27ced7bf9082d0cbb8261315423405c9b2d14030100010116030100303b8f5f207e14a34c814835a671de3025cf69c55a20976e348d692f622b1f8182 e619567c8b8866c571c1ac6df11adb0d Message-Authenticator = 0x0940909b598c4170a6f820374c4adf48 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "0a-00-3e-f0-11-34", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 326 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [ttls] TLS_accept: SSLv3 read client key exchange A [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [ttls] <<< TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 read finished A [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [ttls] TLS_accept: SSLv3 write change cipher spec A [ttls] >>> TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 write finished A [ttls] TLS_accept: SSLv3 flush data [ttls] (other): SSL negotiation finished successfully SSL Connection Established [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 0 to 10.111.4.254 port 1273 EAP-Message = 0x0107004515800000003b1403010001011603010030e9d5415f2dab4d08d3188d183d0c4dc68f65eae604b877e87fc28021e38c48e39ad145595d4cbbbcc00bcd4a5eb6 17f2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf2937007f794654f37c0362b1499c219 Finished request 5. Going to the next request Waking up in 4.9 seconds. Cleaning up request 5 ID 0 with timestamp +42 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xf2937007f794654f did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
