Re: Access Accept

Mon, 26 Sep 2011 01:41:03 -0700

@Alexandre,

I have one more question.

I am looking at this post post-auth { } section.
I can see that the values are not added to attributes in access-accept. For example:

 Module: Checking post-auth {...} for more modules to load
/etc/raddb/sites-enabled/default[460]: ERROR: Failed to find IP address for %{request:NAS-IP-Address}
/etc/raddb/sites-enabled/default[456]: Errors parsing post-auth section.

if I look in access-reqest section (I have comment %{request:NAS-IP-Address}):

Ready to process requests.
rad_recv: Access-Request packet from host xxx.xxx.xxx.xxx port 40239, id=140, length=206
        Acct-Multi-Session-Id = "1317025759333"
        Cisco-Attr-130 = 0x683332332d63616c6c696e672d656e74657270726973652d69643d656e74504258
        Calling-Station-Id = "81609000"
        NAS-Identifier = "intraswitch"
        NAS-IP-Address = xxx.xxx.xxx.xxx
        3GPP2-Prepaid-acct-Capability = 0x010600000002
        3GPP2-Session-Termination-Capability = 1
        h323-conf-id = "h323-conf-id=1317025759333"
        Vendor-Specific = 0x00000009
        Event-Timestamp = "Sep 26 2011 10:29:19 CEST"
        User-Name = "081609000"
        User-Password = "1122"

I can see that the ip from NAS is send. If I have this line written (NAS-IP-Address = %{request:NAS-IP-Address}) the radius will not start.
Should this be add the any other section then post-auth {...}?
BR,
MIha
 
On 9/24/2011 2:43 PM, Alexandre Chapellon wrote:
Le 23/09/2011 22:01, Miha a écrit : 
Hi @Alexandre,

here is a copy from me default file:

post-auth {
        #  Get an address from the IP Pool.
#       main_pool
update reply {
        3GPP2-Prepaid-acct-Capability =
%{request:3GPP2-Prepaid-acct-Capability}

}

  update reply {
          Acct-Multi-Session-Id = %{request:Acct-Multi-Session-Id}

}
IIRC I use double quoted variables in my config. Anyway, this is odd it happens for the second attributes and not the first one.

 
I have also try this way, but still the same:

update reply {
        3GPP2-Prepaid-acct-Capability =
%{request:3GPP2-Prepaid-acct-Capability}
        Acct-Multi-Session-Id = %{request:Acct-Multi-Session-Id}

}
This sounds better.
I do not see any problem with quotes.

Thank you!

Br,
Miha


--
View this message in context: http://freeradius.1045715.n5.nabble.com/Access-Accept-tp4832711p4834972.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

--

Alexandre Chapellon

Ingénierie des systèmes open sources et réseaux.
Follow me on twitter: @alxgomz



-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to