Thanks very much for the fastest and efectivest answer.
2011/10/4 Arran Cudbard-Bell <[email protected]> > > On 4 Oct 2011, at 13:32, Alejandro Gandara wrote: > > Hi list, > > Im using freeradius 2.1.10 with ldap and I have a doubt. > > Im testing radius with two NAS , first one an openvpn service and the > other one is a switch Procurve. > > My question is the following: > > Can I configure the openvpn nas to read some attribute from the ldap ( as > framedipaddress) and at the same time configure switch procurve to read the > attribute pool-name from the radius? > How can I tell freeradius which attribute read for each nas? > > For example: > > User1 connect trhough openvpn so it will get the ip provided from > framedipaddress attribute. > User 1 disconnect openvpn > User 1 connect with wired connection so it will get the IP provided for > ippool after read poolname attribute from ldap. > > > Sure... > > sites-available/default > > authorize { > if(Client-shortname == 'openvpn'){ > update reply { > Framed-IP-Address := "%{ldap:my ldap query}" > } > } > else { > update reply { > My-Other-Attribute := "%{ldap:my ldap query}" > } > } > } > > clients.conf > > client <foo ip> { > shortname = openvpn > } > > > Arran Cudbard-Bell > [email protected] > > Betelwiki, Betelwiki, Betelwiki.... http://wiki.freeradius.org/ ! > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
