On Tue, Oct 11, 2011 at 3:44 AM, Nataniel Klug <[email protected]>wrote:
> Hello all,**** > > ** ** > > I am trying to solve a problem about Simultaneous-Use, not > in the code because it’s working, but inside my network layout. I have two > different NAS the can authenticate the same client for PPPoE, something like > this:**** > > ** ** > > ** ** > > [ internet ] ---+ NAS01 +--- [ client ]**** > > ----| NAS02 |----**** > > ** ** > > So the client can be connected to any of those 2 NAS for > different reasons and when I have a problem, like a power surge, in one of > the NAS I got the connection stopped because the NAS that turned down is not > sending any accounting packets to the radius. It’s ok when I use only one > NAS but I am using 2 for backup in cases like a power surge or a hard > shutdown of the machine. If the simultaneous-use work so the client cannot > connect to NAS02 (assuming that NAS01 has been turned down) until NAS01 is > powered on and send account-stop to the radius.**** > > ** ** > > So, my question is: how can I use Simultaneous-Use in this > scenario? Should I make a script that test if the NAS is online every 10 > seconds and if not list all clients connect and stop that connections? > Should this work? Is there anyone with the same scenario that can share the > solution for the problem?**** > > ** ** > > -- > You mean use simultaneous-use = 1? You can use unlang. Assume NAS01 is now dead. There's a stalled session in db. When user try to login using NAS02, check for his username and fill the session to eliminate it.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
