Erik wrote: > I've been going in circles for days on how to come up with a > workaround to get simultaneous-use checking working on my FreeRadius + > PEAP MSCHAPv2 deployment. I have read through seemingly all of the > posts... I suspect certain areas which might be causing the problem: > 1) my NAS does not seem to be sending accounting information. The > radacct table is empty & this is also visible in the debugs. There is > no area to set up RADIUS accounting on the NAS (it's a cheap netgear) > and it doesn't appear to send accounting packets by default.
The Simultaneous-Use checks won't work. > 2) "checkrad.pl" is not being called automatically when no accounting > data is being returned by "simul_count_query". I have the NAS type > set to "cisco" to trigger checkrad.pl for troubleshooting purposes, > but it doesn't seem to do any good. Because the cheap NAS (a) isn't a Cisco box, and (b) doesn't support the protocols needed by checkrad. > First of all - is it possible to do simultaneous-use checking if the > NAS doesn't send radius accounting packets? Can the radius server > somehow autonomously keep track of this without packets from the NAS? No. It's impossible. > If not, is there another application which will fulfill this function? Reflash the NAS so that it has a firmware which supports this feature. > Do I need to move to radutmp? No. > ========================================== > RELEVANT CONFIGURATIONS (some output omitted): Nothing in the documentation says to post the configuration. We don't need it. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
