Hi,
our freeradius is working with our softswitch perfect. All my columns in
radacct are populating.
Now I have set freeswitch and I also got it work with freeradius. This
are two different softswitchs and I would like that bouth will populate
same base. Problem appears as freeswitch is sending different
attributes, so I make differences in
dialup.conf (than the other softswitch will not populate right radacct
table).
Can I populate same base? But how to configure dialup.conf than?
How can I set up in on radius to different base with to different
dialup.conf (I must edit this file due to different attribute
representation).
Below you will find freeswitch attributes:
rad_recv: Accounting-Request packet from host xxx.xxx.xxx.xxx port
33534, id=134, length=402
Acct-Status-Type = Stop
Acct-Session-Id = "1d83c61f-3167-4c15-9da3-871cd76f3d7c"
Freeswitch-Hangupcause = Normal-Clearing
User-Name = "018108500"
Freeswitch-Src = "018108500"
Freeswitch-CLID = "018108500"
Freeswitch-Dst = "051357952"
Freeswitch-Dialplan = "XML"
Framed-IP-Address = xxx.xxx.xxx.xxx
Freeswitch-Context = "default"
Freeswitch-Ani = "018108500"
Freeswitch-Source = "mod_sofia"
Freeswitch-Lastapp = "bridge"
Freeswitch-Billusec = 2427061
Freeswitch-Callstartdate = "2011-11-09T14:30:45.095287+0100"
Freeswitch-Callanswerdate = "2011-11-09T14:30:52.965479+0100"
Freeswitch-Callenddate = "2011-11-09T14:30:55.392540+0100"
Acct-Session-Time = 2
Freeswitch-Signalbond = "inbound"
NAS-Port = 0
Acct-Delay-Time = 0
NAS-IP-Address = xxx.xxx.xxx.xxx
# Executing section preacct from file
/usr/local/etc/raddb/sites-enabled/default
P.s.: I am getting all inputs in radacct table duplicate. Can you help
me out how can I deal with this issue?
I have put radius log on http://pastebin.freeswitch.org/17730
BR,
Miha
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
