Roland Pinches <rolyp...@ihug.co.nz> wrote: > We've run into a problem with our freeradius server virtual machine. > It's a RHEL5.5 VM running on ESXi 4.1 and it talks to a cisco NAS. It > currently works but we have performance issues, which I have partly > tracked down to a very specific VMware issue - if running linux with > more than 1 vCPU, vmxnet3 NIC connected to a distributed vSwitch. The > work around is to change the network adapters to something other than > a vmxnet3 adapter.
> However, this is where my radius problem comes in. When I change the > NICs, the MAC address changes, which means I need to setup the static > IP addresses again. Not a problem and I can then ping the cisco device > and the cisco device can ping the radius server. The problem is, no > radius traffic flows between them. You can override the generated MAC. Try putting in the one fromt the vmxnet3 NIC and see what happens. Grüße, Sven. -- Sigmentation fault. Core dumped. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html