Tawanda Kavayi wrote: > I am using Freeradius 2.1.12 with mysql and Daloradius GUI. My setup is > a Wimax network with AAA for the ASN gateway being handled by > Freeradius. My problem is that I have configured FR to assign framed ip > addresses to authenticated clients, but instead the IP's are being > assigned from the IP pool on the ASN gateway, ignoring the configured > framed IP's.
Then go fix the ASN gateway. Suppose I gave you driving directions to my office, and you ended up somewhere else. If the instructions are correct, is the problem the instructions, or following them? > After authentication, mysql returns the correct framed-ip-address > 192.168.15.230 as seen below: No. You did NOT show the Access-Accept with the Framed-IP-Address in it. Don't bother posting it here, go look for it yourself. If it's there, then again blame the ASN gateway. > However, a different IP address, 192.168.15.229, is seen when the > Accounting-Request packet is sent by the NAS: > > rad_recv: Accounting-Request packet from host 192.168.12.214 port 24048, > id=90, length=256 .. > Vendor-Specific = 0x00001fe4340600000000 You need to use dictionary.starent.vsa1, not dictionary.starent. I love vendors who use conflicting dictionaries. It makes life *so* much easier for everyone. > What should I be looking at to resolve this? Read the starent documentation to see what you need to send in an Access-Accept. Make sure it's sent. If it still doesn't work, call Starent and ask them why their product is broken. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
