On 2/10/12 12:57 PM, Phil Mayers wrote:
On 10/02/12 11:33, Riccardo Veraldi wrote:
Hello,
I have a radius infrastructure with multiple ESSID.
in particular I have the eduroam ESSID and another local ESSID.
They are managed by my freeradius2 server with 2 virtual-server
instances, one for eduroam and the other for my local ESSID.
Both are 802.1x infrastructures.
I have always been disabling EAP-TLS in my local infrastructure writing
this in the users file
DEFAULT EAP-Type == EAP-TLS, Auth-Type := Reject
but now I need EAP-TLS to be avaliable for eduroam and I do not like the
solution to have a completely different radius server,
If you have an "eduroam" SSID, what's going to stop your users
connecting to that, and using EAP-TLS?
I wanted to do it with only one freeradius server with virtual server
configuration.
Thus I need to enable EAP-TLS for eduroam and disable EAP-TLS for my
local SSID.
Does your wireless platform let you set different radius servers
per-SSID? If so, you can run a FreeRADIUS virtual server on separate
ports.
How is possible to do this on freeradius2 ?
1. Define two virtual servers
2. Have them listen on different ports
3. Set the radius servers for the two SSIDs to the relevant ports
4. Write a different policy in each virtual server
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
Hi,
i know all this and I already did this.
What i miss is to write a different policy on each virtual server.
eduroam is all fine EAP-TLS is the default.
But how to tell the other virtual server to disable EAP-TLS authentication ?
the virtual servers receive requests from the same access points, and
each access ponit have two SSID.
Each ESSID send request oto a different virtual server IP.
I have found no way to tell the local virtual server (the one serving
local ESSID) to disable EAP-TLS.
If I do it in users file, this configuration is valid for both virtual
servers:
DEFAULT EAP-Type == EAP-TLS, Auth-Type := Reject
I Cannot have two separate users file, the users file is common to both
virtual servers.
Is there a way to have a users file for eac hvirtual server ?
I did not find it is possibile from documentation.
Ricdk
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
