Thanks Lliya,
Have done so but still client not able to connected.
Eric M
________________________________
From: Iliya Peregoudov <[email protected]>
To: Mulindwa <[email protected]>; FreeRadius users mailing list
<[email protected]>
Sent: Tuesday, March 6, 2012 3:42 PM
Subject: Re: Wimax with Free radius
> +- entering group authenticate {...}
> [eap] EAP Identity
> [eap] processing type md5
> rlm_eap_md5: Issuing Challenge
> ++[eap] returns handled
> Sending Access-Challenge of id 249 to 196.0.4.18 port 1812
You're still have EAP-MD5 as default EAP method.
Look thoroughly into eap.conf. There is default_eap_type setting in eap {...}
section. This is default outer EAP method. You should set it to ttls. There is
default_eap_type setting in ttls {...} subsection of eap {...} section. This is
default inner EAP method for EAP-TTLS. You should set it to gtc.
Restart freeradius after the change. You should see something like this when
processing first Access-Request:
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
