On Thu, May 31, 2012 at 3:45 PM, Brian Julin <[email protected]> wrote: > > >> Kaya Saman wrote: >> I will perform a wireshark and tcpdump packet capture this evening in >> order to try to debug more clearly what is going on between the >> devices however, in the mean time I was wondering if there was some >> sort of interoperability quircks between newer Cisco IOS releases and >> FreeRADIUS (VMPS)?? > > Likely the CISCO decided to change the way they interpret the > tunnel-group-id attribute. > > There are two ways to pass this attribute (normally, and using a > cisco vendor specific attribute.) > > There are three ways the switch may interpret the string contained therein. > > 1) numerically > 2) vlan name > 3) vlan group name > >> Can anyone suggest anything? > > Play with different combinations of the above. > > Also verify that all the global and interface commands which are > applied on a working 12.2 switch remain applied on 15.0. Sometimes > command syntax changes and the commands get rejected on upgrade. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks for the information. I will have a look at the tunnel-group-id attribute. Regards, Kaya - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
