I've looked into the pcap file. WiMAX-HA-RK-Lifetime, WiMAX-HA-RK-SPI,
WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI attributes are there. My Wireshark
does not show their names, but they are there:
WiMAX-HA-RL-Lifetime = 900
VSA: l=7 t=Unknown-Attribute(17): 0000000384
WiMAX-HA-RK-SPI = 0
VSA: l=7 t=Unknown-Attribute(16): 0000000000
WiMAX-HA-RK-Key = 0xA2DD89C4...
VSA: l=37 t=Unknown-Attribute(15): 00A2DD89C4...
WiMAX-FA-RK-SPI = 2474926121
VSA: l=7 t=Unknown-Attribute(61): 0093846029
Go ask ASN-GW vendor what's going on.
Rathod Subhashchandra wrote:
Dear Fajar,
ACCESS-ACCEPT screen logs shows following attributes but not in pcap.
Screen logs:
Sending Access-Accept of id 6 to 125.125.40.38 port 1812
WiMAX-MN-NAI = "u...@tataelxsi.com"
Service-Type = Authenticate-Only
State = 0xd2be425bd6b84f57c4a7ea648e1803b6
MS-MPPE-Recv-Key =
0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d
MS-MPPE-Send-Key =
0x49a17afa5f030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3
WiMAX-MSK =
0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d49a17afa5f
030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3
EAP-Message = 0x03060004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "u...@tataelxsi.com"
WiMAX-IP-Technology = PMIP4
WiMAX-hHA-IP-MIP4 = 172.16.104.175
WiMAX-DNS-Server = 192.168.10.3
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Idle-Mode-Notification-Cap = Supported
WiMAX-AAA-Session-Id = 0x30313032
WiMAX-Packet-Data-Flow-Id = 1
WiMAX-Service-Data-Flow-Id = 1
WiMAX-Service-Profile-Id = 1
WiMAX-Direction = Bi-Directional
WiMAX-FA-RK-Key = 0xb977ed6f9bf2231bba840d7cf1c02cd1bd7f47fa
Framed-IP-Address = 192.168.10.3
Session-Timeout = 172800
Termination-Action = 3
Chargeable-User-Identity = "u...@tataelxsi.com"
WiMAX-HA-RK-Lifetime = 900
WiMAX-HA-RK-SPI = 0
WiMAX-HA-RK-Key = 0x2b83c9fd0e5c3e2f8af0aa4464ba27ff8372fe4b
WiMAX-FA-RK-SPI = 2474926121
The content of Wireshark is attached.
Wireshark ACCESS-ACCEPT message does not reflect WiMAX-HA-RK-Lifetime,
WiMAX-HA-RK-SPI, WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI.
Does it mean that above attributes are not added in the message and simply
printed by FreeRadius server? Or Vendor specific HA mode parameters are
different?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
