On Fri, Jul 13, 2012 at 5:43 PM, Alan Buxey <a.l.m.bu...@lboro.ac.uk> wrote: > Hi, > > > The very last line of startup output will say > > Ready to process requests > > > If you get NOTHING else then the server is not getting any packets through > to it...which is either something simple such as the built in firewall of > cents (edit the firewall using your favourite method to allow UDP 1812 > through for RADIUS auth packets), a network issue, (routing, ACLs etc) or a > switch configuration issue. > > alan > > -- > This smartphone uses free WiFi around the world with eduroam, now that's > what I call smart. >
Yep that's what it says!! I am not sure however, if either the switch or RADIUS has been configured correctly. The switch config I pulled from both the Wiki and the Cisco configuration guides however, they mostly are for RADIUS based login authentication - of course I went to the MAB portion. I have attached the Cisco config to my initial posting and I know it would be off-topic here but since it is relevant I thought that maybe somebody could help :-) Regards, Kaya - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
