Actions Taken before raising this case thats the reason why i sent the config files : The thing is the log files is getting dumps of loggings even when nobody is working on the Nodes. I have started the test with one node before doing the rest.
- Restored the file using the examples on the original file - Done a Radtest with this results: NAS user root@radius-pst:/usr/local/etc/raddb# radtest read-only testing localhost 1812 testing123 Sending Access-Request of id 77 to 127.0.0.1 port 1812 User-Name = "read-only" User-Password = "testing" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=77, length=115 Service-Type = Login-User Idle-Timeout = 600 Timetra-Access = console Timetra-Home-Directory = "cf3:" Timetra-Restrict-To-Home = true Timetra-Default-Action = permit-all Timetra-Cmd = "debug,configure" Timetra-Action = deny Rgds On Wed, Sep 12, 2012 at 6:23 PM, Alan DeKok <[email protected]>wrote: > George Innocent wrote: > > Find attached my config files. > > You were not asked to attach your config files. > > > As stated this works fine with the servers i have but fails with the > Routers > > We don't care. > > > Please restore the users file with the help of the original file. > > Then add the > > correct entries copying the samples from the original file. > > You need to follow instructions. > > You probably also need someone else to run your RADIUS server. Your > history of messages on the list show a near complete vacuum with respect > to reading documentation and following instructions. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > -- Regards: George Innocent.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
