This is the full dump I get
rad_recv: Access-Request packet from host 193.000.221.00 port 1645, id=213,
length=141
Framed-Protocol = PPP
User-Name = "[email protected]"
CHAP-Password = 0x045f3e13da52acf8b9e784c0c125ed102f
Connect-Info = "11066368/1094656"
NAS-Port-Type = Virtual
NAS-Port = 832
NAS-Port-Id = "Uniq-Sess-ID832"
Service-Type = Framed-User
NAS-IP-Address = 193.000.221.00
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
[chap] Setting 'Auth-Type := CHAP'
++[chap] returns ok
++[mschap] returns noop
[files] users: Matched entry DEFAULT at line 172
++[files] returns ok
[sql] expand: %{User-Name} -> [email protected]
[sql] sql_set_user escaped user --> '[email protected]'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id ->
SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '[email protected]' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY id ->
SELECT id, username, attribute, value, op FROM radreply
WHERE username = '[email protected]' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname
FROM radusergroup WHERE username =
'[email protected]' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER
BY id -> SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = 'Serg_100GB' ORDER BY id
[sql] User found in group Serg_100GB
[sql] expand: SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER
BY id -> SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = 'Serg_100GB' ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++? if ("%{sql: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime
> (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));}")
sql_xlat
expand: %{User-Name} -> [email protected]
sql_set_user escaped user --> '[email protected]'
expand: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly'; -> SELECT radgroupcheck.value FROM radusergroup
Inner Join radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname
WHERE radusergroup.username = '[email protected]' AND
radgroupcheck.attribute = 'CS-Total-Octets-Monthly';
rlm_sql (sql): Reserving sql socket id: 3
sql_xlat finished
rlm_sql (sql): Released sql socket id: 3
expand: %{sql: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';} -> 107375000000
sql_xlat
expand: %{User-Name} -> [email protected]
sql_set_user escaped user --> '[email protected]'
expand: SELECT SUM( AcctInputOctets + AcctOutputOctets) FROM radacct
WHERE UserName='%{User-Name}' AND AcctStartTime > (DATE_SUB(CURDATE(),INTERVAL
DAYOFMONTH(CURDATE())DAY)); -> SELECT SUM( AcctInputOctets + AcctOutputOctets)
FROM radacct WHERE UserName='[email protected]' AND
AcctStartTime > (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));
rlm_sql (sql): Reserving sql socket id: 2
sql_xlat finished
rlm_sql (sql): Released sql socket id: 2
expand: %{sql: SELECT SUM( AcctInputOctets + AcctOutputOctets) FROM
radacct WHERE UserName='%{User-Name}' AND AcctStartTime >
(DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));} -> 48827883953
? Evaluating ("%{sql: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime
> (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));}") -> TRUE
++? if ("%{sql: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime
> (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));}") -> TRUE
++- entering if ("%{sql: SELECT radgroupcheck.value FROM radusergroup Inner
Join radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime
> (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));}") {...}
+++[reply] returns ok
++- if ("%{sql: SELECT radgroupcheck.value FROM radusergroup Inner Join
radgroupcheck ON radusergroup.groupname = radgroupcheck.groupname WHERE
radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime
> (DATE_SUB(CURDATE(),INTERVAL DAYOFMONTH(CURDATE())DAY));}") returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = CHAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group CHAP {...}
[chap] login attempt by "[email protected]" with CHAP password
[chap] Using clear text password "Sergy987" for user
[email protected] authentication.
[chap] chap user [email protected] authenticated succesfully
++[chap] returns ok
# Executing section post-auth from file /etc/freeradius/sites-enabled/default
+- entering group post-auth {...}
[sqlippool] expand: Existing IP: %{reply:Framed-IP-Address} (did
%{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name}) -> Existing IP: 193.000.221.00 (did cli port 832 user
[email protected])
[sqlippool] Framed-IP-Address already exists
Existing IP: 193.000.221.00 (did cli port 832 user
[email protected])
++[sqlippool] returns noop
[sql] expand: %{User-Name} -> [email protected]
[sql] sql_set_user escaped user --> '[email protected]'
[sql] expand: %{User-Password} ->
[sql] ... expanding second conditional
[sql] expand: %{Chap-Password} -> 0x045f3e13da52acf8b9e784c0c125ed102f
[sql] expand: INSERT INTO radpostauth (username,
pass, reply, authdate) VALUES (
'%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES (
'[email protected]',
'0x045f3e13da52acf8b9e784c0c125ed102f',
'Access-Accept', '2012-10-09 14:53:29')
rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES (
'[email protected]',
'0x045f3e13da52acf8b9e784c0c125ed102f',
'Access-Accept', '2012-10-09 14:53:29')
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
++[sql] returns ok
++[exec] returns noop
Sending Access-Accept of id 213 to 193.000.221.00 port 1645
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Framed-IP-Address = 193.000.221.00
Service-Type = Framed-User
Framed-MTU = 1500
Cisco-AVPair = "ip:dns-servers=208.67.222.222 8.8.8.8"
Framed-IP-Netmask = 255.255.255.255
Reply-Message = "You have reached your transfer limit. Limited
bandwitch"
Finished request 17.
-----Original Message-----
From:
freeradius-users-bounces+jonathan.bastin=peerpointinternet.co...@lists.freeradius.org
[mailto:freeradius-users-bounces+jonathan.bastin=peerpointinternet.co...@lists.freeradius.org]
On Behalf Of Alan DeKok
Sent: 09 October 2012 14:17
To: FreeRadius users mailing list
Subject: Re: Query help
Jonathan Bastin wrote:
> *Issue I get is that I always get *
>
> Tue Oct 9 13:43:17 2012 : Info: ++- if ("%{sql: SELECT
> radgroupcheck.value FROM radusergroup Inner Join radgroupcheck ON
> radusergroup.groupname = radgroupcheck.groupname WHERE
> radusergroup.username = '%{User-Name}' AND radgroupcheck.attribute =
> 'CS-Total-Octets-Monthly';}"<= "%{sql: SELECT SUM( AcctInputOctets +
> AcctOutputOctets) FROM radacct WHERE UserName='%{User-Name}' AND
> AcctStartTime > (DATE_SUB(CURDATE(),INTERVAL
> DAYOFMONTH(CURDATE())DAY));}") returns ok
>
> *It doesn’t actualy update the reply biased on what the outcome is of
> the SQL query. Any help would be very much appreciated.*
a) you're using "radiusd -xX". That's not necessary. Just use "radiusd -X"
b) You're not looking at the debug lines BEFORE that one. They show why the
"if" is taken, or not taken.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--------------------------------------------------------------------------------------------------------------------------
This email (including any attachments) is intended only for the recipient(s)
named above. It may contain confidential or privileged information and should
not be read, copied or otherwise used by any other person. If you are not the
named recipient please contact the sender and delete the email from your
system. The author's incumbent expressions, views and thoughts are their own
and not necessarily representative of those of the Peer Point Internet Ltd or
associated companies.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
