Hi Phil,
Here below a debug output :
==================
rad_recv: Access-Request packet from host 127.0.0.1 port 11148, id=74,
length=94
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 10123
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "dfrise", looking up realm NULL
[suffix] Found realm "NULL"
[suffix] Adding Stripped-User-Name = "dfrise"
[suffix] Adding Realm = "NULL"
[suffix] Proxying request from user dfrise to realm NULL
[suffix] Preparing to proxy authentication request to realm "NULL"
++[suffix] returns updated
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
# Executing section pre-proxy from file /etc/raddb/sites-enabled/default
+- entering group pre-proxy {...}
[cache] expand: %{User-Name} -> dfrise
[cache] expand: I'm the cached reply from %t -> I'm the cached
reply from Wed Feb 20 08:28:43 2013
[cache] expand: 0x010203 -> 0x010203
rlm_cache: Adding entry for "dfrise", with TTL of 10
++[cache] returns updated
Sending Access-Request of id 24 to 13.22.27.198 port 1812
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 10123
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
Proxy-State = 0x3734
Proxying request 0 to home server 13.22.27.198 port 1812
Sending Access-Request of id 24 to 13.22.27.198 port 1812
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 10123
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
Proxy-State = 0x3734
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Accept packet from host 13.22.27.198 port 1812, id=24,
length=30
Idle-Timeout = 1800
Proxy-State = 0x3734
# Executing section post-proxy from file /etc/raddb/sites-enabled/default
+- entering group post-proxy {...}
[eap] No pre-existing handler found
++[eap] returns noop
[cache] expand: %{User-Name} -> dfrise
rlm_cache: Found entry for "dfrise"
++[cache] returns ok
Found Auth-Type = Accept
Auth-Type = Accept, accepting the user
# Executing section post-auth from file /etc/raddb/sites-enabled/default
+- entering group post-auth {...}
++[exec] returns noop
[cache] expand: %{User-Name} -> dfrise
rlm_cache: Found entry for "dfrise"
++[cache] returns ok
Sending Access-Accept of id 74 to 127.0.0.1 port 11148
Reply-Message += "I'm the cached reply from Wed Feb 20 08:28:43
2013"
Idle-Timeout = 1800
Reply-Message += "I'm the cached reply from Wed Feb 20 08:28:43
2013"
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 22765, id=125,
length=94
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 21740
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "dfrise", looking up realm NULL
[suffix] Found realm "NULL"
[suffix] Adding Stripped-User-Name = "dfrise"
[suffix] Adding Realm = "NULL"
[suffix] Proxying request from user dfrise to realm NULL
[suffix] Preparing to proxy authentication request to realm "NULL"
++[suffix] returns updated
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
# Executing section pre-proxy from file /etc/raddb/sites-enabled/default
+- entering group pre-proxy {...}
[cache] expand: %{User-Name} -> dfrise
rlm_cache: Found entry for "dfrise"
++[cache] returns ok
Sending Access-Request of id 105 to 13.22.27.198 port 1812
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 21740
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
Proxy-State = 0x313235
Proxying request 1 to home server 13.22.27.198 port 1812
Sending Access-Request of id 105 to 13.22.27.198 port 1812
User-Name = "dfrise"
User-Password = "xxxx276988"
NAS-IP-Address = 13.22.27.94
NAS-Identifier = "sshd"
NAS-Port = 21740
NAS-Port-Type = Virtual
Service-Type = Authenticate-Only
Calling-Station-Id = "ci-1-6.unil.ch"
Proxy-State = 0x313235
Going to the next request
Waking up in 0.9 seconds.
Waking up in 3.0 seconds.
rad_recv: Access-Reject packet from host 13.22.27.198 port 1812, id=105,
length=25
Proxy-State = 0x313235
# Executing section post-proxy from file /etc/raddb/sites-enabled/default
+- entering group post-proxy {...}
[eap] No pre-existing handler found
++[eap] returns noop
[cache] expand: %{User-Name} -> dfrise
rlm_cache: Found entry for "dfrise"
++[cache] returns ok
Using Post-Auth-Type REJECT
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> dfrise
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Sending Access-Reject of id 125 to 127.0.0.1 port 22765
Reply-Message += "I'm the cached reply from Wed Feb 20 08:28:43
2013"
Finished request 1.
Going to the next request
Waking up in 3.0 seconds.
Cleaning up request 0 ID 74 with timestamp +45
Waking up in 1.9 seconds.
Cleaning up request 1 ID 125 with timestamp +46
Ready to process requests.
=================
Dominique
On 02/20/13 01:47 PM, Phil Mayers wrote:
On 20/02/13 08:38, Dominique Frise wrote:
Hi,
We would like to configure a freeradius proxy-server v. 2.2.0 under
RHEL6 with users caching.
The scenario we would like to achieve is the following:
1. client sends username/OTP to freeradius-proxy that relays to central
radius server.
Central radius server accepts and replies to freeradius-proxy that
relays to client.
2. client sends same username/OTP within TTL to freeradius-proxy that
accepts and replies to client.
This should be possible using Rlm_cache module but we did not find a
proper how-to for configuring this.
Can you show a debug ("radiusd -X") of an auth request? This will make
it more obvious what attributes you need to have as key/value.
Also, this will probably only work if your OTP is simple PAP-like i.e.
request/accept. It probably won't work if Access-Challenge or any
challenge/response is involved.
But, for example, if your request looked like this:
User-Name = foo
User-Password = bar
OTP-Password = 123456
...then you'd want an rlm_cache config like this:
cache otpcache {
# note - we need to escape the key values
# otherwise the client can perform injection/overlap
# attacks by modifying their username
key =
"%{urlquote:%{User-Name}}/%{urlquote:%{User-Password}}/%{urlquote:%{OTP-Password}}"
ttl = 60
}
...and then:
authorize {
# first, just check the cache, don't
# create entries or set reply attrs
update control {
Cache-Status-Only = yes
}
otpcache
# future cache lookups here, and in post-auth,
# should be normal ones
update control {
Cache-Status-Only !* ANY
}
if (ok) {
# entry found in cache; set auth type to accept
# and call cache again to get reply attrs
update control {
Auth-Type := Accept
}
otpcache
ok
}
...
}
post-auth {
# first, delete any existing cache entries
update control {
Cache-TTL = 0
}
otpcache
# clear that variable
update control {
Cache-TTL !* ANY
}
# now cache the reply
otpcache
}
It's a bit awkward TBH; I kind of wish modules could have "named
methods" e.g. "cache.{check,get,set,expire}" but you can wrap it all in
a policy.conf if you want readability.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
