Hi Matthew,
On 04/17/2013 05:53 PM, Matthew Newton wrote:
On Wed, Apr 17, 2013 at 05:04:11PM -0400, John Center wrote:
it correctly, it looks like one could have a "profiles" file with
individual named profiles defined containing NAS-specific text that
would be sent back to the NAS as is upon successful authentication.
Is anything like this still supported? Can the "User-Profile"
There are many ways of sending attributes back based on incoming
attributes (such as which NAS the request came from). One way
would be to just use an instantiation of the files module that
keys off the NAS-IP-Address:
files nasprofile {
key = "%{NAS-IP-Address}"
usersfile = ${confdir}/nas-profile
...
}
in the "nas-profile" file:
10.0.0.1
Reply-Message := "Welcome to NAS 1"
10.0.0.2
Reply-Message := "Welcome to NAS 2"
then call "nasprofile" in your sites-enabled/default authorize
section.
...or use one of the other multitude of methods just discussed in
the Idle-Timeout thread :-)
Matthew
It was just serendipity that I asked this question at the right time!
I'll check this out & the Idle-timeout thread. Seems like a good topic
for the Wiki...
Thanks.
-John
--
John Center
Villanova University
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
