Thanks a lot Alan, that fixed the issue :-)... We tried this option before, but only tested with radclient and it doesn't update the calling-station-id. Here is the command we used: radclient 10.25.37.61 auto HANU -f acct_start_test1.txt
The 'acct_start_test1.txt' file as the following lines: Packet-Type=4 Packet-Dst-Port=1813 Acct-Session-Id = "4D2BB8AC-00000098" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Name = "Release2-build11@viasat-oss" User-Password = "password" NAS-Port = 100 Called-Station-Id = "00-02-6F-AA-AA-AA:My Wireless" Calling-Station-Id = "\000\240\274/\370\260" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 48Mbps 802.11b" This time tested with the actual NAS with real UT, and it works great. :-) Thanks again -Hanu -----Original Message----- From: freeradius-users-bounces+hanumantha.cholleti=viasat....@lists.freeradius.org [mailto:freeradius-users-bounces+hanumantha.cholleti=viasat....@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Thursday, June 13, 2013 12:30 PM To: FreeRadius users mailing list Subject: Re: Calling-Station-Id Not Getting Updated in radacct table On 2013-06-13, at 2:37 PM, "Cholleti, Hanumantha" <[email protected]> wrote: > Similar to the above wimax configuration for authorize section, do we need to > enable any setting for accounting to fix the Calling-Station-Id attribute > that will populate the radacct correctly as string? List "wimax" in the "preacct" section. It will fix the attribute there, too. Alan DeKok. - List info/subscribe/unsubscribe? See https://urldefense.proofpoint.com/v1/url?u=http://www.freeradius.org/list/users.html&k=OWT%2FB14AE7ysJN06F7d2nQ%3D%3D%0A&r=RbstrbGHTDEX5Lhn9%2F%2FI6NK56FT6UXWy%2BZ7zzvTZGx0%3D%0A&m=h7466jNJ7JhWxGNz%2F6LQfMg7WMTuyeE87ZTOken%2Fsfc%3D%0A&s=e956bd3d2375f80f132368b8bf087352e4d7bd705ebd5cdcd54ba5b78ff4a742 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
