On Fri, Jun 14, 2013 at 3:33 PM, Iliya Peregoudov <iperegu...@cboss.ru>wrote:
> On 14.06.2013 5:56, geebs wrote: > >> rad_recv: Access-Request packet from host 10.8.13.254 port 1645, id=6, >> length=220 >> User-Name = "example.com <http://example.com>" >> >> User-Password = "cisco" >> Calling-Station-Id = "GigabitEthernet >> 14/0/3.31010096:3101-96#**587204450###pppoe 00:04:ed:d1:78:85#QTNITE4025M >> atm 1/1/04/27:8.35#" >> Connect-Info = "1000000000" >> NAS-Port-Type = Virtual >> NAS-Port = 501 >> NAS-Port-Id = "Uniq-Sess-ID501" >> Service-Type = Outbound-User >> NAS-IP-Address = 10.8.13.254 >> > > Looks line Cisco PPPoE service profile request > http://www.cisco.com/en/US/**docs/ios-xml/ios/bbdsl/** > configuration/12-4t/bba-svc-**callstup.html<http://www.cisco.com/en/US/docs/ios-xml/ios/bbdsl/configuration/12-4t/bba-svc-callstup.html> > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/** > list/users.html <http://www.freeradius.org/list/users.html> Yes it is, I'm not sure what's going on there, but to be honest this is not the major issue. The problem is that micha...@example.com does initially connect, but then gets disconnected... If you have a look at the 1st post, they connect fine, but then get booted, and the only thing in the logs is the above. What would cause this ?
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
