The configured user with the stated attributes: steve Cleartext-Password := "testing" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 192.168.1.2, Framed-IP-Netmask = 255.255.255.0, Alc-IPsec-Interface = private_ipsec, Alc-IPsec-SA-Lifetime = 1200, Alc-IPsec-SA-Encr-Algorithm = aes128, Alc-IPsec-SA-Auth-Algorithm = sha1,
Error received on running radtest remains same. But when i comment the attributes the radtest is successful On 24 June 2013 19:55, <[email protected]> wrote: > Hi, > > > I am creating attributes for the user using the scripts below but on > > running the radtest i get the failure attributes ; which seems to have > > changed. I am using Freeradius 2.1.0 . > > > > "user1test" Auth-Type := Local, User-Password == "testpassword" > > > > Framed-IP-Address = 172.162.3.33, > > > > Framed-IP-Netmask = 255.255.255.0, > > > > Alc-Primary-Dns = 4.4.2.2, > > > > Alc-Primary-Nbns = 8.8.4.4, > > > > Alc-IPsec-Serv-Id = 199920, > > > > Alc-IPsec-Interface = public_ipsec, > > > > Alc-IPsec-SA-Lifetime = 1200, > > > > Alc-IPsec-SA-Encr-Algorithm = aes128, > > > > Alc-IPsec-SA-Auth-Algorithm = sha1 > > 1) its Cleartext-Password := NOT User-Password == > > 2) formatting is VERY important...I hope you dont have blank lines between > each entry > > 3) ensure that these attributes that you are using are in a dictionary > file and that the dictionary file is being read by the server when it > starts > > alan > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > -- Regards: George Innocent.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
