Hi IIiya, thanx for your answer i tried to fix syntax error in in users file and also i tried using patch in
http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120914/13b2c044/attachment.ksh but unfortunately, the result is same, my first device can connect to internet and the second device can't connect if my first device is already connect thanx for your time and your answer best regards On Fri, Jun 21, 2013 at 6:31 PM, Iliya Peregoudov <iperegu...@cboss.ru>wrote: > On 20.06.2013 17:56, raptor raptor wrote: > >> my users format >> >> 1510019760806391@wlan.mnc001.**mcc510.3gppnetwork.org<1510019760806...@wlan.mnc001.mcc510.3gppnetwork.org>EAP-Type >> := SIM >> EAP-Sim-Rand1 = 0x 326258E6F77C40f3866DB25DEA60AE**4D, >> EAP-Sim-SRES1 = 0x DD287535, >> EAP-Sim-KC1 = 0x 7F743521EBabb000, >> EAP-Sim-Rand2 = 0x FD9989BD90AD4a03962E6C08C000C1**4B, >> EAP-Sim-SRES2 = 0x BFf89ad2, >> EAP-Sim-KC2 = 0x 1C7098005Fea8c00, >> EAP-Sim-Rand3 = 0x 26CC8DB02C9848c7BBCC2790E3F091**3B, >> EAP-Sim-SRES3 = 0x 17172cc6, >> EAP-Sim-KC3 = 0x BF34bf34D4ca4c00, >> > > Syntax error here. There should be no comma at the end of stanza. Due to > comma next non-blank line is also considered to be part of this stanza. So > next stanza (1510080325656501) will not be parsed correctly. > > > rad_recv: Access-Request packet from host 192.168.2.1 port 2048, id=2, >> length=215 >> User-Name = >> "1510080325656501@wlan.mnc008.**mcc510.3gppnetwork.org<1510080325656...@wlan.mnc008.mcc510.3gppnetwork.org> >> " >> NAS-IP-Address = 192.168.2.1 >> Called-Station-Id = "48f8b315461a" >> Calling-Station-Id = "001adc019b98" >> NAS-Identifier = "48f8b315461a" >> NAS-Port = 2 >> Framed-MTU = 1400 >> NAS-Port-Type = Wireless-802.11 >> EAP-Message = 0x0200003801313531303038303332** >> 3536353635303140776c616e2e6d6e**633030382e6d63633531302e336770** >> 706e6574776f726b2e6f7267 >> Message-Authenticator = 0x1e6d83334fd94f359c5fda46d916**ce7e >> > > [skipped] > > ++[files] returns noop >> > > rlm_files was unable to find stanza for 1510080325656501 due to before > mentioned syntax error. > > > [eap] processing type sim >> can not initiate sim, no RAND1 attribute >> > > EAP-Sim-Rand1 attribute is not found in reply list. I don't know why. > rlm_sim_files earlier said that it successfully found auth vectors. > Definitely rlm_sim_files not working as expected. > > Try to fix syntax error in users file. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/** > list/users.html <http://www.freeradius.org/list/users.html> >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
