Hi guys I had to also set the "*use_tunneled_reply=yes*" in the eap.conf to get the Dynamic vlan assignment to work
On 12 July 2013 19:42, val john <[email protected]> wrote: > Hi guys , > > Small question , do i need to import radius ldap schema ( items like > radiusprofiles > ) to our ldap server to get this VLAN assignment work > > Thank You > john > > > On 12 July 2013 18:39, Arran Cudbard-Bell <[email protected]>wrote: > >> >> On 12 Jul 2013, at 13:57, val john <[email protected]> wrote: >> >> > Hi guys , >> > >> > i have a freeradius setup that works with ldap group authentication ,i >> also need to configure the dynamic VLAN assignment , so i configured the >> "users" file as fallows , >> > >> > DEFAULT Ldap-Group == "cn=staff,ou=groups,dc=ldap,dc=example,dc=com" >> > Tunnel-Type = VLAN, >> > Tunnel-Medium-Type = IEEE-802, >> > Tunnel-Private-Group-Id = "100", >> > Reply-Message = "You are Accepted" >> > >> > DEFAULT Ldap-Group == "cn=nonstaff,ou=groups,dc=ldap,dc=example,dc=com" >> > Tunnel-Type = VLAN, >> > Tunnel-Medium-Type = IEEE-802, >> > Tunnel-Private-Group-Id = "200", >> > Reply-Message = "You are Accepted" >> > >> > DEFAULT Auth-Type := Reject >> > >> > >> > ,Do i need any other configuration file to be edited to get VALN >> assignment to work ..? or juts "users" file is enough >> >> Just users file is fine. >> >> Arran Cudbard-Bell <[email protected]> >> FreeRADIUS Development Team >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
