No You need to read the manual from your nas / device you are trying to send a coa or disconnect to about what it expects in the message as I said before.
It's nothing to do with freeradius and everything about how you talk to your nas. Error-Cause = Missing-Attribute Says everything in my view. On 23/07/2013 6:21 PM, "Muhammad Nadeem" <[email protected]> wrote: > thanks tiffany > > I have followed your instruction, but same issue,, here is the log > > [root@aaaisb1 terminus]# cat dic.txt | radclient -x 2.2.2.2:3799disconnect > 'huaweiaaa' > Sending Disconnect-Request of id 179 to 2.2.2.2 port 3799 > Acct-Session-Id = "1B1E97C3" > User-Name = "002682615F4E@test_cpe.com" > NAS-IP-Address = 2.2.2.2 > rad_recv: Disconnect-NAK packet from host 2.2.2.2 port 3799, id=179, > length=26 > Error-Cause = Missing-Attribute > > tell me one thing,,,i need some configuration for enabling COA in > freeradius??? > thanks > > > > > On Tue, Jul 23, 2013 at 10:39 AM, Tiffany Pasisir < > [email protected]> wrote: > >> Hi Muhammad**** >> >> ** ** >> >> Try put in a file**** >> >> ** ** >> >> Acct-Session-Id=1B1E97C3**** >> >> User-Name=002682615F4E@test_cpe.com**** >> >> NAS-IP-Address=2.2.2.2**** >> >> ** ** >> >> cat file | radclient -x 2.2.2.2:3799 disconnect 'huaweiaaa'**** >> >> ** ** >> >> See how it goes**** >> >> ** ** >> >> Send all the output here so we can help**** >> >> ** ** >> >> Tiffany**** >> >> ** ** >> >> *From:* freeradius-users-bounces+tiffany.pasisir= >> [email protected] [mailto: >> freeradius-users-bounces+tiffany.pasisir= >> [email protected]] *On Behalf Of *Muhammad Nadeem >> *Sent:* Tuesday, 23 July 2013 2:50 PM >> *To:* FreeRadius users mailing list >> *Subject:* coa**** >> >> ** ** >> >> hi everybody,,**** >> >> I wanna implement COA (Change Of Authorization) in freeradius. I have a >> live session of a device, I wanna disconnect this device forcefully.**** >> >> ** ** >> >> I isssued following command **** >> >> ** ** >> >> echo >> "Acct-Session-Id=1B1E97C3,User-Name=002682615F4E@test_cpe.com,NAS-IP-Address=2.2.2.2" >> | radclient -x 2.2.2.2:3799 disconnect 'huaweiaaa'**** >> >> ** ** >> >> but it give the error of "missing attribute".**** >> >> Can anybody tell me what is the issue. Thanks >> **** >> >> ** ** >> >> -- >> Best Regards >> Muhammad Nadeem >> Muhammad Ali Jinnah University **** >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > > > > -- > Best Regards > Muhammad Nadeem > Muhammad Ali Jinnah University > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
