Thank you Gentlemen, I am working with Alvarion CPEs but a WiChorus ASN, which I have setup on a commercial AAA without issues. I also have Freeradius working with WiChorus on another instance also but not for receiving these particular TLVs.
I initially performed a tcpdump and this was where I was seeing the different values (which match radsniff btw) than what was programmed. I then compared the capture to our working solution (a commercial radius platform) and confirmed that the values radsniff / tcpdump were what I was expecting, which in turn do not match the output from Freeradius. I feel the problem is when the values are copied to the outer tunnel, but just these TLVs get corrupted. I'll take a look at 3.0.0 and see if I can work with that and post back my findings. Thanks again, James On 07/30/2013 11:13 AM, David Peterson wrote: > RE: WiMAX TLV value correct in debug but not correct in packet capture > > Don't forget if the hardware is Alvarion or Runcom you cannot use the > standard dictionaries. > > Alvarion (now Telrad) is proprietary but similar to the standard > dictionary > and Runcom only uses their own. > > David > > > -----Original Message----- > From: > freeradius-users-bounces+davidp=wirelessconnections....@lists.freeradius.org > [mailto:freeradius-users-bounces+davidp=wirelessconnections.net@lists.freera > dius.org] On Behalf Of Alan DeKok > Sent: Tuesday, July 30, 2013 8:02 AM > To: FreeRadius users mailing list > Subject: Re: WiMAX TLV value correct in debug but not correct in packet > capture > > James Leavitt wrote: > > I've probably missed something or buggered an option, but I've > > searched and searched and cannot find an answer to this. This is for a > > WiMAX deployment and am using the built in dictionaries. The issue is > > with the WiMAX-Packet-Flow-Descriptor tlv . > ... > > Everything looks good but on a pcap / radsniff I get this: > > Put the raw "pcap" file somewhere. Maybe the issue is the server, maybe > it's radsniff. > > You could also try the git branch "release_branch_3.0.0". It has a > re-written WiMAX encoder / decoder, which now works everywhere. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > -- > This message has been scanned by MailScanner > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
