On 08/06/2013 05:29 PM, Alan DeKok wrote:
Dominique Frise wrote:
Is there any other flag/function that would indicate that an
Access-Challenge packet was received from the NAS?
A NAS will NEVER send an Access-Challenge to the server.
A proxy will receive an Access-Challenge from a home server. As was
said, you need the latest code from the GIT to use that feature.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Did a fresh install from
http://github.com/FreeRADIUS/freeradius-server/tree/v2.x.x
./radiusd -v
radiusd: FreeRADIUS Version 2.2.1 (git #12be9f6), for host
x86_64-unknown-linux-gnu, built on Aug 6 2013 at 21:51:33
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
But still no luck :-(
---------------------
rad_recv: Access-Challenge packet from host X.X.X.X port 1812, id=101,
length=49
Reply-Message = "Enter OTP:"
State = 0x38373131
Prompt = No-Echo
Proxy-State = 0x313039
# Executing section post-proxy from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group post-proxy {...}
[eap] No pre-existing handler found
++[eap] returns noop
++? if (Response-Packet-Type == Access-Challenge)
? Evaluating (Response-Packet-Type == Access-Challenge) -> FALSE
----------------------
Any other idea?
Dominique
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
