So now using latest git and wanpipe is even worse compared to snapshot from last week. freetdm now also detects and queue the DTMF from the dialed number.
The new patch is available. On Wed, 2 Jun 2010 16:26:49 -0400, Moises Silva wrote: I'm going to test this DTMF scenario now and let you know. In the meantime, would it be much to ask a patch that I can apply using git apply?? The patch still fails to apply using git, I see you are still using svn, try git plz. The code looks good though :-) Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. m...@sangoma.com [1] On Wed, Jun 2, 2010 at 4:19 PM, wrote: I just updated to 3.5.11 and the result is the same. DE : freeswitch-dev-boun...@lists.freeswitch.org [3] [mailto:freeswitch-dev-boun...@lists.freeswitch.org [4]] DE LA PART DE Moises Silva ENVOYÉ : mercredi 2 juin 2010 21:35 À : freeswitch-dev@lists.freeswitch.org [5] OBJET : Re: [Freeswitch-dev] FXS bridged on FXO ports and DTMF I believe the problem was that the driver enabled even outgoing DTMF detection on the chip ( which does not make much sense by default since you only care about incoming ) and was fixed a few months ago Do you still see this behavior? which driver version? Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. m...@sangoma.com [6] On Wed, Jun 2, 2010 at 3:22 PM, wrote: I come back on this topic as I did not find a clean/good solution to this problem. As reminder, the problem occurs when an FXS channel is bridged on an FXO channel (seen with sangoma A400 hardware with HW DTMF detection). The problem is that each leg of the bridge is detecting the inband DTMF, and so freeswitch sends each detected DTMF from one leg to the other, and so on and so forth (as each leg detects the DTMF again and again). I guess what would be needed for these cases is some application that would prevent detected DTMF to be sent to the other leg. Can anybody give me a hint on whether or not such application exists, and if not, a starting point to try to create one. Thanks François _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org [8] http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev [9] UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev [10] http://www.freeswitch.org [11] _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org [12] http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev [13] UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev [14] http://www.freeswitch.org [15] Links: ------ [1] mailto:m...@sangoma.com [2] mailto:de...@thom.fr.eu.org [3] mailto:freeswitch-dev-boun...@lists.freeswitch.org [4] mailto:freeswitch-dev-boun...@lists.freeswitch.org [5] mailto:freeswitch-dev@lists.freeswitch.org [6] mailto:m...@sangoma.com [7] mailto:de...@thom.fr.eu.org [8] mailto:FreeSWITCH-dev@lists.freeswitch.org [9] http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev [10] http://lists.freeswitch.org/mailman/options/freeswitch-dev [11] http://www.freeswitch.org [12] mailto:FreeSWITCH-dev@lists.freeswitch.org [13] http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev [14] http://lists.freeswitch.org/mailman/options/freeswitch-dev [15] http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
