That shows the other end is sending a RESTART command. Can you make a trace of the debug log on the console or the logfile from mod_logfile showing the calls working and then on to when you get the issue including the several failed call attempts in their entirety and post them to http://jira.freeswitch.org under the openzap category.
On Mon, Sep 22, 2008 at 9:29 AM, palani sivagurunathan < [EMAIL PROTECTED]> wrote: > > > > Hi, > > I have installed freeswitch through SVN in centos.OutBound is working > fine .But not always .Once we make 8 to 10 call from a sip extension we get > service unavailable error in xlite . Error and configuration are pasted > below .we observed the problem is getting rectified after 5 to 10 mins .and > we are able to make calls and again after 8 to 10 calls Errors happen > > how to check. what will be the issue > > > my configuration is: > > > *wanpipe1.conf * > > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE_API, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 9 > PCIBUS = 0 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = CRC4 > FE_LINE = 1 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_SIG_MODE = CCS > TE_HIGHIMPEDANCE = NO > LBO = 120OH > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 16 > TDMV_HW_DTMF = NO > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = YES > MTU = 80 > > > * openzap.conf* > > [span wanpipe] > name => OpenZAP > number => 1 > trunk_type => E1 > b-channel => 1:1-15 > d-channel => 1:16 > b-channel => 1:17-31 > > > *openzap.conf.xml * > > <configuration name="openzap.conf" description="OpenZAP Configuration"> > <settings> > <param name="debug" value="0"/> > </settings> > <pri_spans> > <span id="1"> > <param name="mode" value="user"/> > <param name="dialect" value="euro"/> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> > </span> > </pri_spans> > </configuration> > > > > *default.xml* > <?xml version="1.0" encoding="utf-8"?> > <!-- http://wiki.freeswitch.org/wiki/Dialplan_XML --> > <include> > <context name="default"> > <extension name="Long Distance - wanpipe"> > <condition field="destination_number" expression="^9(\d{5,15})$"> > <action application="set" data="dialed_ext=$1"/> > <action application="bridge" data="OpenZAP/1/a/${dialed_ext}"/> > </condition> > </extension> > </context> > </include> > > > > After starting the freeswitch . In console i type oz dump 1 a > > > *my status before calling is:* > > span_id: 1 > chan_id: 16 > physical_span_id: 1 > physical_chan_id: 16 > type: DQ921 > state: UP > last_state: DOWN > cid_date: > cid_name: > cid_num: > ani: > aniII: > dnis: > rdnis: > cause: NONE > * > my (oz dump 1 a) status After calling is:* > > span_id: 1 > chan_id: 16 > physical_span_id: 1 > physical_chan_id: 16 > type: DQ921 > state: UP > last_state: DOWN > cid_date: > cid_name: > cid_num: > ani: > aniII: > dnis: > rdnis: > cause: NONE > > But while i try to make a outbound call continously, i am getting following > error > > [08 02 00 00 4e 18 03 a1 83 81 79 01 80] > > 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Layer4 (size: > 119) > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:319 zap_isdn_931_34() Yay I got an > event! Type:[46] Size:[119] CRV: 0 (0, CTX: Originator) > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:351 zap_isdn_931_34() zchan 0 > (-1:-1) source isdn_data->channels_remote_crv[0] > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:399 zap_isdn_931_34() Changing > state on 1:1 from DOWN to RESTART > 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Sending message to Q.921 (size: > 119) > 2008-09-23 01:05:50 [DEBUG] Span:0 Q.931() Creating Q.931 Message Header: > ProtDisc 8 (0x8), CRV 0 (0), CRVflag: 0 (0), MesType: 78 (0x4e) > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:1499 q931_rx_32() WRITE 13 > > -------------------------------------------------------------------------------- > [08 02 00 00 4e 18 03 a1 83 81 79 01 80] > > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE > [RESTART] > 2008-09-23 01:05:50 [DEBUG] mod_openzap.c:1368 on_clear_channel_signal() > got clear channel sig [RESTART] > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:882 state_advance() Changing state > on 1:1 from RESTART to DOWN > 2008-09-23 01:05:50 [DEBUG] ozmod_isdn.c:796 state_advance() 1:1 STATE > [DOWN] > 2008-09-23 01:05:50 [DEBUG] zap_io.c:1088 zap_channel_done() channel done > 1:1 > > > > > > > > > -- > > > Thanks & Regards, > Palanivel.S > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] <[EMAIL PROTECTED]> GTALK/JABBER/PAYPAL:[EMAIL PROTECTED]<[EMAIL PROTECTED]> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] <[EMAIL PROTECTED]> iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED]<[EMAIL PROTECTED]> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
