From my experience it shows red when: - the cables are not connected - the pri lines are not synchronized yet - sometimes the telco provider has to reset the line
Best regards Peter Michael S Collins schrieb: > This looks like a zaptel issue. Do we have any zaptel users familiar > with this issue? If not you should probably check on the asterisk list > for help. Once zaptel is working we can then see about getting openzap > up. > > -MC > > Sent from my iPhone > > On Jan 12, 2009, at 6:36 AM, "Franziska Röhler" <[email protected]> > wrote: > > >> I use q931 too. >> >> openzap.conf.xml >> >> <configuration name="openzap.conf" description="OpenZAP >> Configuration"> >> <settings> >> <param name="debug" value="0"/> >> <!--<param name="hold-music" value="$${moh_uri}"/>--> >> <!--<param name="enable-analog-option" value="call-swap"/>--> >> <!--<param name="enable-analog-option" value="3-way"/>--> >> </settings> >> <!-- one entry here per openzap span --> >> <pri_spans> >> <span id="1"> >> <param name="mode" value="user"/> >> <param name="dialect" value="q931"/> >> <param name="dialplan" value="XML"/> >> <param name="context" value="default"/> >> </span> >> </pri_spans> >> </configuration> >> >> openzap.conf >> >> [span zt] >> name => OpenZap >> number => 1 >> trunk_type => e1 >> b-channel => 1-15, 17-31 >> d-channel => 16 >> >> cat /proc/zaptel/* >> Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ >> CCS/CRC4 RECOVERING >> >> 1 WCT1/0/1 Clear (In use) RED >> 2 WCT1/0/2 Clear (In use) RED >> 3 WCT1/0/3 Clear (In use) RED >> 4 WCT1/0/4 Clear (In use) RED >> 5 WCT1/0/5 Clear (In use) RED >> 6 WCT1/0/6 Clear (In use) RED >> 7 WCT1/0/7 Clear (In use) RED >> 8 WCT1/0/8 Clear (In use) RED >> 9 WCT1/0/9 Clear (In use) RED >> 10 WCT1/0/10 Clear (In use) RED >> 11 WCT1/0/11 Clear (In use) RED >> 12 WCT1/0/12 Clear (In use) RED >> 13 WCT1/0/13 Clear (In use) RED >> 14 WCT1/0/14 Clear (In use) RED >> 15 WCT1/0/15 Clear (In use) RED >> 16 WCT1/0/16 HDLCFCS (In use) RED >> 17 WCT1/0/17 Clear (In use) RED >> 18 WCT1/0/18 Clear (In use) RED >> 19 WCT1/0/19 Clear (In use) RED >> 20 WCT1/0/20 Clear (In use) RED >> 21 WCT1/0/21 Clear (In use) RED >> 22 WCT1/0/22 Clear (In use) RED >> 23 WCT1/0/23 Clear (In use) RED >> 24 WCT1/0/24 Clear (In use) RED >> 25 WCT1/0/25 Clear (In use) RED >> 26 WCT1/0/26 Clear (In use) RED >> 27 WCT1/0/27 Clear (In use) RD >> 28 WCT1/0/28 Clear (In use) RED >> 29 WCT1/0/29 Clear (In use) RED >> 30 WCT1/0/30 Clear (In use) RED >> 31 WCT1/0/31 Clear (In use) RED >> >> Why is it RED? zttool shows no alarms (ok) and ztfcg -vv shows that >> 31 Channels to configure. >> >> >> >> >>> I had the same problem a while ago with German PRI lines (S2M). >>> >>> Do you have >>> <param name="dialect" value="q931"/> >>> in your >>> openzap.conf.xml? >>> >>> In older Versions of openzap I used euro, in newer releases this >>> didn't >>> work any more, so I used q931. >>> >>> If this is not successfull, >>> >>> can you post your openzap.conf.xml and openzap.xml >>> and the output of cat /proc/zaptel/* >>> >>> Best regards >>> Peter >>> >>> [email protected] schrieb: >>> >>>> Hello, >>>> >>>> I'm a newbie in FS. >>>> >>>> I installed and configure Openzap and Zaptel. I have a PRI Digium >>>> >>> Wildcard TE110P. >>> >>>> When I call a number then I get an Error! >>>> >>>> 2009-01-12 10:20:01 [CRIT] zap_io.c:804 zap_channel_open_any() All >>>> >>> circuits are busy. >>> >>>> 2009-01-12 10:20:01 [ERR] mod_openzap.c:910 >>>> channel_outgoing_channel() >>>> >>> No channels available >>> >>>> 2009-01-12 10:20:01 [ERR] switch_ivr_originate.c:926 >>>> >>> switch_ivr_originate() Cannot create outgoing channel of type >>> [openzap] cause: >>> [DESTINATION_OUT_OF_ORDER] >>> >>>> What's wrong? Do you need any configurations? >>>> >>>> Thanks! >>>> Best Regards, Curly >>>> >>>> >>>> >>>> >>> _______________________________________________ >>> Freeswitch-users mailing list >>> [email protected] >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >> _______________________________________________ >> Freeswitch-users mailing list >> [email protected] >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > _______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
