>> I'm new to FS, and experimenting with it on a constrained >> environment (PCEngines ALIX board running Voyage Linux 0.62). >> >> So far, FS has compiled fine, and I can register multiple >> softphones and make calls between them, but I'm lost at how to >> configure a Sangoma U100 so I can make and receive calls over an >> analogue line. >> >> I've installed the wanpipe drivers (3.5.4) from Sangoma, and the >> wanrouter utility detects the USB device, and I've compiled it to >> support the TDM API. >> >> FS was compiled with the Openzap module - as best as I can tell. >> >> I thought that I would be able to use the wancfg_tdmapi utility to >> configure the /etc/wanpipe/wanpipe1.conf and then use the generated >> configuration file as the basis for configuring autoload_configs/ >> openzap.conf.xml. > > try wancfg_fs
Thanks for the suggestion Michael, but the same result occurs as when I try wancfg_tdmapi, ie: "No Sangoma voice compatible cards found/configured" > >> However, the wancfg utility doesn't generate the wanpipe1.conf, and >> I'm stumped. >> >> Any pointers would be much appreciated. >> _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
