> What is the output of wantouter hwprobe? voyage:~# wanrouter hwprobe
------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . U100 : BUSID=1-1 : V=00 Card Cnt: U100=1 voyage:~# dahdi_hardware usb:001/002 wanpipe- 10c4:8461 Sangoma WANPIPE USB-FXO Device > > On Aug 3, 2009, at 3:12 AM, Merul Patel <[email protected]> wrote: > >>>> I'm new to FS, and experimenting with it on a constrained >>>> environment (PCEngines ALIX board running Voyage Linux 0.62). >>>> >>>> So far, FS has compiled fine, and I can register multiple >>>> softphones and make calls between them, but I'm lost at how to >>>> configure a Sangoma U100 so I can make and receive calls over an >>>> analogue line. >>>> >>>> I've installed the wanpipe drivers (3.5.4) from Sangoma, and the >>>> wanrouter utility detects the USB device, and I've compiled it to >>>> support the TDM API. >>>> >>>> FS was compiled with the Openzap module - as best as I can tell. >>>> >>>> I thought that I would be able to use the wancfg_tdmapi utility to >>>> configure the /etc/wanpipe/wanpipe1.conf and then use the generated >>>> configuration file as the basis for configuring autoload_configs/ >>>> openzap.conf.xml. >>> >>> try wancfg_fs >> >> Thanks for the suggestion Michael, but the same result occurs as when >> I try wancfg_tdmapi, ie: >> >> "No Sangoma voice compatible cards found/configured" >> >>> >>>> However, the wancfg utility doesn't generate the wanpipe1.conf, and >>>> I'm stumped. >>>> >>>> Any pointers would be much appreciated. >>>> _______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
