On Tue, Aug 25, 2009 at 9:35 AM, Raimund Sacherer <[email protected]>wrote:
> Hello, > i was reading through the openzap wiki page and searched the wiki, the only > thing I found about dahdi is a note from January that freeswitch does not > work with dahdi right now. > > You did not search well enough. http://wiki.freeswitch.org/wiki/OpenZAP_OpenR2 , read note 5 there. > Is this current information? Can't I use dahdi kernel drivers for > freeswitch? As the last update to the zaptel drivers is now nearly a year > old (1.4.12) and development has, AFAIK, ceased and new stuff only gehts to > dahdi, correct me please if I am wrong. > both dahdi and zaptel work for FreeSWITCH and no headers are needed, we have our own. > > 00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network > controller [HFC-PCI] (rev 02) > Subsystem: Cologne Chip Designs GmbH ISDN Board > Flags: bus master, medium devsel, latency 16, IRQ 10 > I/O ports at e000 [disabled] [size=8] > Memory at ee001000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 1 > Kernel modules: hisax > > with openZap? I read in the wiki (openZap.conf_Examples) something about > HFC 4 BRI, but i do not know if this is the same as the above mentioned > card. > > > I have access to some pcmcia fxo, and pcmcia isdn cards, could they be > used? I have as well an soekris board with two pcmcia slots, could i use > this with an fxo pcmcia card to actually drive a small home - pbx with > freeswitch? > I don't have experience with such hardware, cannot tell, may be someone else around here may know. -- Moises Silva Software Developer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. [email protected]
_______________________________________________ FreeSWITCH-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
