On 02/08/2015 05:05 PM, glen english wrote:
A TX low pass filter is not shown- I assume that is in there - all harmonics need to be below -30dBm , (preferably -36dBm if it is going to connect to a vehicle antenna and run more than 5W)You'll likely need TWO separate low pass filters for 2m/70cm operation.
We have more stringent requirements in the U.S. (d) For transmitters installed after January 1, 2003, the mean power of any spurious emission from a station transmitter or external RF power amplifier transmitting on a frequency below 30 MHz must be at least 43 dB below the mean power of the fundamental emission. For transmitters installed on or before January 1, 2003, the mean power of any spurious emission from a station transmitter or external RF power amplifier transmitting on a frequency below 30 MHz must not exceed 50 mW and must be at least 40 dB below the mean power of the fundamental emission. For a transmitter of mean power less than 5 W installed on or before January 1, 2003, the attenuation must be at least 30 dB. A transmitter built before April 15, 1977, or first marketed before January 1, 1978, is exempt from this requirement. (e) The mean power of any spurious emission from a station transmitter or external RF power amplifier transmitting on a frequency between 30–225 MHz must be at least 60 dB below the mean power of the fundamental. For a transmitter having a mean power of 25 W or less, the mean power of any spurious emission supplied to the antenna transmission line must not exceed 25 µW and must be at least 40 dB below the mean power of the fundamental emission, but need not be reduced below the power of 10 µW. A transmitter built before April 15, 1977, or first marketed before January 1, 1978, is exempt from this requirement. Most national spurious specifications are derived from this, I think: http://life.itu.int/radioclub/rr/ap03.htm Thanks Bruce
------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
