On 12/12/15 16:06, Steve wrote: > The one on the bottom goes to R19 and top goes to R20 looks like. I'm > looking at the PNG in the repository. > Bottom also shows a wider bar on the silkscreen. Bottom being with > silkscreen "power" to the left (nearest PTT).
Well, now I'm confused. This is the schematic: http://www.longlandclan.id.au/~stuartl/freedv/2015/12/12-swd/sm1000-swd.png This is what I see: http://www.longlandclan.id.au/~stuartl/freedv/2015/12/12-swd/sm1000-swd.jpg The trace looked to be running from R19 to that top pin, I can see the thicker bar down the bottom end (sort-of visible in that photo), but I'm not sure if that's accidental or if that's indeed the convention being used. I'm used to numbers or a little arrow on the silkscreen. That might be worthwhile on the next run of SM1000s. :-) Regards, -- Stuart Longland (aka Redhatter, VK4MSL) I haven't lost my mind... ...it's backed up on a tape somewhere. ------------------------------------------------------------------------------ _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
