looking at that photo, it's the one on the left. R19 trace sneaks between the right and middle pins and goes down to the left pin.
On Sat, Dec 12, 2015 at 12:29 AM, Stuart Longland < [email protected]> wrote: > On 12/12/15 16:06, Steve wrote: > > The one on the bottom goes to R19 and top goes to R20 looks like. I'm > > looking at the PNG in the repository. > > Bottom also shows a wider bar on the silkscreen. Bottom being with > > silkscreen "power" to the left (nearest PTT). > > Well, now I'm confused. > > This is the schematic: > http://www.longlandclan.id.au/~stuartl/freedv/2015/12/12-swd/sm1000-swd.png > > This is what I see: > http://www.longlandclan.id.au/~stuartl/freedv/2015/12/12-swd/sm1000-swd.jpg > > The trace looked to be running from R19 to that top pin, I can see the > thicker bar down the bottom end (sort-of visible in that photo), but I'm > not sure if that's accidental or if that's indeed the convention being > used. > > I'm used to numbers or a little arrow on the silkscreen. That might be > worthwhile on the next run of SM1000s. :-) > > Regards, > -- > Stuart Longland (aka Redhatter, VK4MSL) > > I haven't lost my mind... > ...it's backed up on a tape somewhere. > > > ------------------------------------------------------------------------------ > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >
------------------------------------------------------------------------------
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
