Hi guys,
It seems ok. I using branch 0.4 and stdlib dsp v1.4.0 from smartmic
download.
And now, I will porting fdmdv to IP04.
2018-05-10 10:03 GMT+07:00 Đích Kiều <dich...@gmail.com>:
> Hi Steve,
>
> I build completely, but my sm1000.bin run with SYNC led on, ERROR led
> blinky fast forever or 4 led blink sequence. Specialty, I try your
> sm1000.bin same result. But, sm1000.bin which I downloaded from
> http://www.rowetel.com/downloads/codec2/smartmic/sm1000.bin run OK with
> ERROR led off.
>
> 2018-05-09 19:55 GMT+07:00 Steve <coupaydevi...@gmail.com>:
>
>> Time moves on...
>>
>> As far as I know, the build process in codec2-dev is the one you want.
>>
>> The Makefile has an algorithm in it that downloads a library from
>> st.com, however this library is now deprecated and a new system of
>> software development is the STM32Cube. The file that gets downloaded
>> is junk.
>>
>> You can still download the file manually, but you have to register
>> with the web site.
>>
>> So, best to create a directory called "stm/dl" and put the manually
>> downloaded zip file in there. I have a copy at:
>>
>> https://www.dropbox.com/sh/qvs2bvoyjxem0nq/AACTzcoMPudowahrbfppEd_Xa?dl=0
>>
>> There is new stuff in codec2 that uses a version number. This doesn't
>> compile for the firmware, so edit the codec2.h file
>> and comment out the line:
>>
>> #include <codec2/version.h>
>>
>> Then edit the Makefile and you will see a line called "all"
>>
>> all: libstm32f4.a codec2_profile.bin fft_test.bin dac_ut.bin
>> dac_play.bin adc_rec.bin pwm_ut.bin fdmdv_profile.bin
>> sm1000_leds_switches_ut.bin sm1000.bin adcdac_ut.bin
>> freedv_tx_profile.bin freedv_rx_profile.bin adc_sd.bin usb_vcp_ut.bin
>> tuner_ut.bin fast_dac_ut.bin adc_sfdr_ut.bin adc_rec_usb.bin
>> si5351_ut.bin mco_ut.bin sm2000_stw.bin sm2000_adcdump.bin
>> sm2000_rxdemo.bin
>>
>> edit this to:
>>
>> all: libstm32f4.a sm1000.bin
>>
>> So, with the manually downloaded library in place it should build with
>> some warnings.
>>
>> So then plug in your sm1000 and power on with the PTT held and type:
>>
>> sudo make sm1000.pgm
>>
>> and if you have dfu-util installed, it will copy the sm1000.bin file
>> to your firmware.
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Freetel-codec2 mailing list
>> Freetel-codec2@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
>>
>
>
>
> --
>
> *Kiều Việt Đích*
> *Công ty 129 - Ban cơ yếu chính phủ*
>
> Email : dich...@gmail.com
> SĐT : 0904736189
>
--
*Kiều Việt Đích*
*Công ty 129 - Ban cơ yếu chính phủ*
Email : dich...@gmail.com
SĐT : 0904736189
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
Freetel-codec2@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
