Hi Alan. I think you can reach me at don_r...@comcast.net. That is a different ISP from my other addresses.
I am working on the stm32 implementation and using the x86 version as the reference. That uses an Arm Cortex-M4 processor. I don't know what is in the R-Pi but I expect that it is much more compatible with the full x86. That platform should be fully tested too some day but I have more than enough to keep me busy for now. Don On Tue, Oct 09, 2018 at 12:09:48PM +1000, Alan Beard wrote: > Hi Don, > > Noting your comments in SVN 3890. Do you need a login on a Pi system > > with disk space to burn, 500Gb ? > > You'll find the stm32 libraries in /usr/local.... and the current code in > /home/data/alanb > > or you can upload with the script. > > just ssh wsjt...@www.unixservice.com.au, pwd wsjtdev2 > > Enter pwd twice as this gets you to the right box. > > I'll be in Europe for three weeks, email may work. > > Alan VK2ZIW > > On Fri, 5 Oct 2018 08:02:29 +1000, Alan Beard wrote > > Hi all, > > > > > > On-air testing of the latest code is needed so please try the repeater. > > > > > > 7177KHz LSB mode 700D, put my callsign in the, sent text. > > > > > > Alan VK2ZIW > > > > > > > > On Wed, 26 Sep 2018 07:16:34 +1000, Alan Beard wrote > > > Hi Enrich, > > > > > > > > > Hardware for "parrot", Nothing in particular, just any Linux box. > > > > > > > > > To keep the power use down, I use a Raspberry Pi clone. > > > I use Fedora linux as, for the ARM processor they have made their > > > distribution > > > almost hardware independent. There are two steps in making a bootable SD > > > card > > > simples. Supports about 50 boards with one SD card image file. > > > > > > > > > On the audio side I use a Behringer UCA202 USB device. That's because it > > > has RCA > > > line output connectors to which goes to my home-brew isolation box to my > > > FT-450 > > > transceiver. > > > > > > > > > Any audio port device supported by Linux will do, must do 48000 > > > samplerate. > > > > > > > > > For PTT I use a PL2303 USB serial adapter to supply DTR to the above > > > isolation box's > > > opto-coupler. > > > > > > > > > In the code there's provision to use a Pi GPIO port. > > > > > > > > > Pi considerations > > > ============= > > > Since my Pi is a development box, it MUST have a good Hard Disk. > > > So I'd pick a board with a High Speed Disk Interface and migrate > > > the root filesystem onto that disk, off the SD card. > > > > > > SSDs are cheap and available and low power. That's what I use, a 128Gb. > > > > > > It's constantly writing log files and audio files and, I download the > > > latest > > > SVN code, compile and run, this way I help our developers by running, > > > real time, their code. > > > > > > Alan VK2ZIW > > > > > > > > > > > > > > > > > > On Tue, 25 Sep 2018 18:15:42 +0930, Erich Heinzle wrote > > > > Any particular hardware/build requirements for the repeater code other > > > > than (I assume) linux? > > > > > > > > Regards, > > > > > > > > VK5HSE > > > > > > Alan > > > > > > Evil flourishes when good men do nothing. > > > Consider the Christmas child. > > > --------------------------------------------------------------------------- > > > > > > Alan Beard Unix Support Technician from 1984 to today > > > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS > > > Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals > > > etc.. > > > +61 2 47353013 (h) Support Programming, shell scripting, "C", > > > assembler > > > 0414 353013 (mobile) After uni, electronics tech > > > > > > > Alan > > > > Evil flourishes when good men do nothing. > > Consider the Christmas child. > > --------------------------------------------------------------------------- > > Alan Beard Unix Support Technician from 1984 to today > > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS > > Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals > > etc.. > > +61 2 47353013 (h) Support Programming, shell scripting, "C", > > assembler > > 0414 353013 (mobile) After uni, electronics tech > > > > Alan > > Evil flourishes when good men do nothing. > Consider the Christmas child. > --------------------------------------------------------------------------- > Alan Beard Unix Support Technician from 1984 to today > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS > Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals etc.. > +61 2 47353013 (h) Support Programming, shell scripting, "C", assembler > 0414 353013 (mobile) After uni, electronics tech > > _______________________________________________ > Freetel-codec2 mailing list > Freetel-codec2@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
