Hi Don, I fixed the password and login works from here Split in Croatia. 73 Alan VK2ZIW
On Thu, 11 Oct 2018 13:18:33 -0700, Don wrote > Alan, thanks for offering this. > > I tried to login and the first system worked fine but the second > (server2) would not accept either xxxx or yyyy in other email. > > --------------------------------- > $ ssh wsjt...@www.unixservice.com.au > The authenticity of host 'www.unixservice.com.au (60.242.216.157)' can't > be established. > ECDSA key fingerprint is > SHA256:tFguBDFWVoopZ4uTfcWoLgMQz8CiS/7ghfJtt0NGA04. > Are you sure you want to continue connecting (yes/no)? yes > Warning: Permanently added 'www.unixservice.com.au,60.242.216.157' > (ECDSA) to the list of known hosts. > wsjt...@www.unixservice.com.au's password: > Last login: Tue Oct 9 12:50:49 2018 > The authenticity of host 'server2 (192.168.7.45)' can't be established. > ECDSA key fingerprint is > SHA256:7HAAUAGGFAzw96dfNoWZpUGLUSuwo5TjyOBWl+NR3yQ. > ECDSA key fingerprint is > MD5:b5:39:f3:7e:85:38:cb:1b:e4:1e:6d:e6:c5:96:9d:18. > Are you sure you want to continue connecting (yes/no)? yes > Warning: Permanently added 'server2,192.168.7.45' (ECDSA) to the > list of known hosts. wsjtdev@server2's password: Permission denied, > please try again. wsjtdev@server2's password: Permission denied, > please try again. wsjtdev@server2's password: Permission denied > (publickey,gssapi-keyex,gssapi-with-mic,password). Connection to > www.unixservice.com.au closed. > --------------------------------- > > I don't need to use this system, I was just going to login and change > the password so your system was safer. > > I have plenty of Debian system here although I use Beaglebone boards > for higher end ARM over the R-Pi. (I'm an open source snob and have > had poor experiances with Broadcom over the years). > > Right now my efforts are focused on the STM32 processor used in the > SM1000 unit and keeping the code working on the X86 as well. > > Hope you are having a good vacation, its Autum here now but I remeber > Spring fondly. > > Don - W7DMR > > On Fri, Oct 05, 2018 at 08:02:29AM +1000, Alan Beard wrote: > > Hi all, > > > > On-air testing of the latest code is needed so please try the repeater. > > > > 7177KHz LSB mode 700D, put my callsign in the, sent text. > > > > Alan VK2ZIW > > > > On Wed, 26 Sep 2018 07:16:34 +1000, Alan Beard wrote > > > Hi Enrich, > > > > > > > > > Hardware for "parrot", Nothing in particular, just any Linux box. > > > > > > > > > To keep the power use down, I use a Raspberry Pi clone. > > > I use Fedora linux as, for the ARM processor they have made their > > > distribution > > > almost hardware independent. There are two steps in making a bootable SD > > > card > > > simples. Supports about 50 boards with one SD card image file. > > > > > > > > > On the audio side I use a Behringer UCA202 USB device. That's because it > > > has RCA > > > line output connectors to which goes to my home-brew isolation box to my > > > FT- 450 > > > transceiver. > > > > > > > > > Any audio port device supported by Linux will do, must do 48000 > > > samplerate. > > > > > > > > > For PTT I use a PL2303 USB serial adapter to supply DTR to the above > > > isolation box's > > > opto-coupler. > > > > > > > > > In the code there's provision to use a Pi GPIO port. > > > > > > > > > Pi considerations > > > ============= > > > Since my Pi is a development box, it MUST have a good Hard Disk. > > > So I'd pick a board with a High Speed Disk Interface and migrate > > > the root filesystem onto that disk, off the SD card. > > > > > > SSDs are cheap and available and low power. That's what I use, a 128Gb. > > > > > > It's constantly writing log files and audio files and, I download the > > > latest > > > SVN code, compile and run, this way I help our developers by running, > > > real time, their code. > > > > > > Alan VK2ZIW > > > > > > > > > > > > > > > > > > On Tue, 25 Sep 2018 18:15:42 +0930, Erich Heinzle wrote > > > > Any particular hardware/build requirements for the repeater code other > > > > than (I assume) linux? > > > > > > > > Regards, > > > > > > > > VK5HSE > > > > > > Alan > > > > > > Evil flourishes when good men do nothing. > > > Consider the Christmas child. > > > --------------------------------------------------------------------------- > > > > > > Alan Beard Unix Support Technician from 1984 to today > > > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS > > > Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals > > > etc.. > > > +61 2 47353013 (h) Support Programming, shell scripting, "C", > > > assembler > > > 0414 353013 (mobile) After uni, electronics tech > > > > > > > Alan > > > > Evil flourishes when good men do nothing. > > Consider the Christmas child. > > --------------------------------------------------------------------------- > > Alan Beard Unix Support Technician from 1984 to today > > 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS > > Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals > > etc.. > > +61 2 47353013 (h) Support Programming, shell scripting, "C", > > assembler > > 0414 353013 (mobile) After uni, electronics tech > > > > > _______________________________________________ > > Freetel-codec2 mailing list > > Freetel-codec2@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > _______________________________________________ > Freetel-codec2 mailing list > Freetel-codec2@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 Alan Evil flourishes when good men do nothing. Consider the Christmas child. --------------------------------------------------------------------------- Alan Beard Unix Support Technician from 1984 to today 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals etc.. +61 2 47353013 (h) Support Programming, shell scripting, "C", assembler 0414 353013 (mobile) After uni, electronics tech _______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
