On Dienstag 27 Januar 2009, Dirk Meyer wrote: > Hans Meine wrote: > > I find this one difficult. I just bought a 1920x1200 LCD for my > > dedicated Freevo box, is that "geared toward PCs"? It's probably a > > corner case, and given the caption "best describes", I'd still choose > > that option, but maybe you want to have a special option for those, since > > they're becoming very common AFAICS. > > I guess that would be more like the last case. The answers should be: > > (o) 4:3 LCD panel geared toward PCs > ( ) 16:10 or 16:9 LCD panel with less than 1280x720 > ( ) CRT television PAL/NTSC > ( ) LCD or Plasma television at 1280x720 or 1365x768 or similar monitor > ( ) LCD or Plasma television at 1920x1080 or similar monitor
I think I prefer Tack's last proposal, because IMHO it would be better not to
mix monitors and TVs. From Freevo's view it may not make a large difference
how the picture gets on a screen, but the whole hardware setup is quite
different. Also, LCD monitors without a separate receiver indicate different
requirements towards TV/receiver integration in Freevo.
BTW: In reply to James Trietsch you wrote:
> 22'' 16:10 LCD: around 200 EUR
> A _good_ 37'' TFT TV: around 600 EUR
That's not how I recall the situation in local stores; although there are
certainly some TVs for 600€ which are not too bad, *good* TVs (i.e. Full HD,
maybe 100Hz, ...) seem to be more costly. I bought a 24" 16:10 LCD for 300€
(OK, it was the presentation sample, but you can get good ones for less than
400€).
OK, your point was that it's not 10x the cost, but 3x, and I agree with you;
it might even be more like 2x-3x. But that's still a multiplicative factor,
and I would not be allowed to pay twice as much, no matter the screen size
(in the end my wife would probably even consider that to be a downside ;-) ).
--
Ciao, / / .o.
/--/ ..o
/ / ANS ooo
signature.asc
Description: This is a digitally signed message part.
------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________ Freevo-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-devel
