Hi,
At the moment I have my remote working partially. I can controll freevo with it but
mplayer completely ignores is. what I did was creating a /etc/freevo/lircrc file.it
is similar to the lircrc file. (see lirc documentation)
Functioning commands in freevo for me at the moment are:
UP
DOWN
LEFT
RIGHT
SELECT
EXIT
so for each button on youre remote you'll get something like this in lircrc
begin
prog = freevo (obvious)
button = REMOTE_UP (see /etc/lirc/lircd.conf)
config = UP (see above, I don't know other commands
there are)
end
Hope this helps to get you going.
Harm Kroon
-----Original Message-----
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> on behalf of "Michael Lewis"
<[EMAIL PROTECTED]>
Sent: Wednesday, April 02, 2003 12:23 AM
To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
Subject: [Freevo-users] remote control and freevo1.3.2pre2
Hey there all,
I'm having problems working our what is the current mode for lircd. I
know lirc is working as irw gives me the output for my remote.. hoever,
I can't seem to get lirc to _in_ freevo
Is freevo using lirc in this release or pylirc?
I have tried editing the config file /etc/freevo/local_conf.py, the
RC_CMDS don't seem to have any effect..
I have done the same to the remote.py with no results..
I've used the helpers/freevo2lirc.pl to convert my remote.py to lircrc..
In all this I haven't found which config file you need to edit to tell
freevo which config file you are using..
So.. anybody have remote control working ATM on the main release? and if
so, what is the current setup required?
Cheers,
Mick
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
--------------------------------------------------------------------------------
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
