> -----Urspr�ngliche Nachricht-----
> Von: Dirk Meyer [mailto:[EMAIL PROTECTED]
> Gesendet: Mittwoch, 3. September 2003 18:07
> An: [EMAIL PROTECTED]
> Betreff: [Freevo-users] Re: Snapshot of 02.Sept.2003: Some problems (and
> proposed solutio ns.. .)
>
> "Pferdekaemper, Thorsten" wrote:
> > I am pretty sure that I am using freevo in X11 mode and from the
> > console in framebuffer mode. (After deleting the four lines
> > mentioned above.) I am using an nvidia graphics card (...) and the
> > vesa framebuffer (the one with the penguin).
>
> Sorry, there was a missunderstanding here. I didn't mean you don't
> know if you run Freevo in X11 or fb mode, Freevo itself doesn't know
Hi,
there's no need for the sorry, I am not really sure myself... :-)
> Yes. So basicly when you have X running and Freevo display is set to
> fbdev or mga, Freevo should autoswitch to x11. On the other side, when
> you set the display to x11 and start without X, freevo should
> autoswitch to fbcon.
>
> > So everything works fine, but it ssems that it shouldn't. Or am I
> > missing something?
>
> Don't know about everything, but when freevo thinks he's using x11 but
> you run it on framebuffer, Freevo will choose xine and not fbxine for
> dvd nav, which doesn't work.
>
So it should be no problem when I use mplayer, because mplayer seems to work with
either one.
But one question remains: Why does mplayer not work, if I try to set display=vesafb
oder fbdev in freevo.config? mplayer complains about not being able to open the
display. When I just delete the display line in freevo.config, it works.
Why that? It should make no difference...
Regards,
Thorsten
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
