> -----Urspr�ngliche Nachricht-----
> Von: William Holt [mailto:[EMAIL PROTECTED]
> >
> > The /etc/freevo.conf file can only support one setting for display.
> > If you want to switch between the two, you'd need to keep two versions
> of
> > the config file and setup the correct version before starting freevo.
> >
> > Freevo should work automatically in either framebuffer mode or X11 mode,
> > but mplayer uses the display setting to determine which display to use.
> So
> > in framebuffer mode, you need display=fbdev (works in 1.3.4 on my GF4
> > 440MX), and in X11, you need display=x11. display=sdl didn't work
> > correctly for me for various reasons.
> >
> Mabey a command switch should be added to freevo to allow setting a
> different path to configs
>
Hi,
as I have written before, it just works for me like it is... And I can use freevo in
X11 or framebuffer.
I don't think that we really need a command switch. Just a little script which copies
around the different config files would do it.
Regards,
Thorsten
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
