Cardwise, it's been beautiful for me under mandrake. Simple: # modprobe bttv # modprobe btaudio # modprobe tvmixer
And it's all set, per the dmesg info: bttv: driver version 0.7.100 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 02:03.0, irq: 16, latency: 32, mmio: 0xda100000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=44801, tuner=Temic 4036FY5 (8), radio=no bttv0: using tuner=8 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c attach [client=Temic NTSC (4036 FY5),ok] bttv0: PLL: 28636363 => 35468950 ... ok bttv0: registered device video0 bttv0: registered device vbi0 btaudio: driver version 0.7 loaded [digital+analog] btaudio: Bt878 (rev 17) at 02:03.1, irq: 16, latency: 32, mmio: 0xda101000 btaudio: using card config "default" btaudio: registered device dsp1 [digital] btaudio: registered device dsp2 [analog] btaudio: registered device mixer1 tvmixer: debug: Temic NTSC (4036 FY5) The hard part was recompiling mplayer with all the appropriate support needed... after figuring out what I was missing the first few times around :) --Morgan On Fri, 2003-10-17 at 07:49, Robert Rozman wrote: > Hello, > > could you give more info about wintv setting ? I'm about to go same route > and wonder if you're willing to share experiences... > > Regards, > Robert ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
