I also think one of the problems might be that the dxr3 video output refuses to allow any resolution setting other than 800X600 no matter what the /etc/freevo/freevo.conf has in it for a resolution size upon starting freevo it says...
"800X600" is too big. Cropping to fit. -----Original Message----- From: Dirk Meyer [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 18, 2003 7:48 AM To: [EMAIL PROTECTED] Subject: [Freevo-users] Re: overscan settings and dxr3 "Gray, Tim" wrote: > I was wondering how can I set freevo to create MORE overscan? > > when I mess withthe overscanX and y settings it zooms in on the center of > the display cutting off the idlebar. I want to do the reverse, create more > overscan I.E. add more deadspace around the outside edge of all screens. I don't undertand. Just set OVERSCAN_X and OVERSCAN_Y in local_conf.py. Dischi -- Drugs cause amnesia and other things I can't remember... ------------------------------------------------------- This SF. Net email is sponsored by: GoToMyPC GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free! https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF. Net email is sponsored by: GoToMyPC GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free! https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
