I've looked it up i use this. MPLAYER_VO_DEV_OPTS = ':fieldparity=top:buffermode=triple:nospic' And if i'm correct it's tripple buffering then.
----- Original Message ----- From: "Youri van Gorselen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 19, 2003 9:02 PM Subject: Re: [Freevo-users] G400 - which driver? > No i didn't after alot of searching i found out it's included now and > provided with a command. Have to look for ya later was something like > buffermode=tripple in :nospic part orso. So i think it's obsolete now, > anyways no tearing at all here (p3-1ghz G400DH on a 100hz tv) > > I did applied the fusion and 32mb patches and i use the (sgram i think) > option for even faster drawing. But DON'T use it if ure card doesn't have > that kind of mem onboard. > > > ----- Original Message ----- > From: "Chris Griffiths" <[EMAIL PROTECTED]> > To: "Freevo-Users" <[EMAIL PROTECTED]> > Sent: Wednesday, November 19, 2003 7:22 PM > Subject: Re: [Freevo-users] G400 - which driver? > > > > Thanks - after finally getting the basic tv-out working under 2.4.22 > > (2.6.0-test9 gave problems) I can attack that next. > > > > Did you patch for the tripple buffering? > > > > The instructions for g400 tv-out under dfbmga seem quite old, are there > > any updated ones for kernel ver 2.4.22, directfb-0.9.19 and mplayer > > 1.0pre2? I'm wondering if some of the patches are included now. > > > > I'm running in greyscale at the moment as I'm using a G450 tv out cable, > > unless Matrox gets stock in soon I'm going to have to break out the > > soldering iron and make a cable :( > > Even in greyscale the quality is awesome compared to the neomagic chip in > > the old laptop I'd been using. Text is crisp rather than fuzzy. Once I > > have the correct cable I'll have to compare it to the tivo. > > > > On Wed, 19 Nov 2003 17:31:01 +0100, "Youri van Gorselen" > > <[EMAIL PROTECTED]> said: > > > I like dfbmga becoz u don't have to manually adjust the image position > > > with > > > fbset. And yes it's better quallity but also alot more work. > > > > > > Using pal @ 720x576 every other res i get a blue screen :( not sure what > > > the > > > problem is but i think it has something todo with fbset :( > > > > > > grtz, > > > Youri > > > > > > ----- Original Message ----- > > > From: "Chris Griffiths" <[EMAIL PROTECTED]> > > > To: "Freevo-Users" <[EMAIL PROTECTED]> > > > Sent: Wednesday, November 19, 2003 4:49 PM > > > Subject: [Freevo-users] G400 - which driver? > > > > > > > > > > Which drivers are people using with G400's? > > > > I think dfbmga will provide best quality / lowest cpu usage - but to > get > > > > that I'm going to need to patch the kernel for irq blanking. > > > > > > > > Have people ran both with dfbmga and without and had a preference? > > > > > > > > What modelines are people using for NTSC resolution? > > > > > > > > Thanks, > > > > Chris > > > > > > > > > > > > ------------------------------------------------------- > > > > This SF.net email is sponsored by: SF.net Giveback Program. > > > > Does SourceForge.net help you be more productive? Does it > > > > help you create better code? SHARE THE LOVE, and help us help > > > > YOU! Click Here: http://sourceforge.net/donate/ > > > > _______________________________________________ > > > > Freevo-users mailing list > > > > [EMAIL PROTECTED] > > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: SF.net Giveback Program. > > > Does SourceForge.net help you be more productive? Does it > > > help you create better code? SHARE THE LOVE, and help us help > > > YOU! Click Here: http://sourceforge.net/donate/ > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: SF.net Giveback Program. > > Does SourceForge.net help you be more productive? Does it > > help you create better code? SHARE THE LOVE, and help us help > > YOU! Click Here: http://sourceforge.net/donate/ > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
