Thanks - I built a cable last night (didn't burn the house down or
anything) and it works great.
I'm building mplayer with dfbmga now - I'll see how that works later.
Here's a modeline for X that seems to work well:
Mode "720x576"
# D: 28.571 MHz, H: 36.443 kHz, V: 57.938 Hz
DotClock 28.572
HTimings 720 720 766 784
VTimings 576 586 590 629
Flags "-HSync" "-VSync"
EndMode
I'm not sure thats the best to be using for NTSC, so I'll keep
experimenting.
Anyone know what the modeline / fb settings are for people using
PVR-350s?
On Thu, 20 Nov 2003 01:45:33 +0100, "Youri van Gorselen"
<[EMAIL PROTECTED]> said:
> I've looked it up i use this.
> MPLAYER_VO_DEV_OPTS = ':fieldparity=top:buffermode=triple:nospic'
> And if i'm correct it's tripple buffering then.
>
>
> ----- Original Message -----
> From: "Youri van Gorselen" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, November 19, 2003 9:02 PM
> Subject: Re: [Freevo-users] G400 - which driver?
>
>
> > No i didn't after alot of searching i found out it's included now and
> > provided with a command. Have to look for ya later was something like
> > buffermode=tripple in :nospic part orso. So i think it's obsolete now,
> > anyways no tearing at all here (p3-1ghz G400DH on a 100hz tv)
> >
> > I did applied the fusion and 32mb patches and i use the (sgram i think)
> > option for even faster drawing. But DON'T use it if ure card doesn't have
> > that kind of mem onboard.
> >
> >
> > ----- Original Message -----
> > From: "Chris Griffiths" <[EMAIL PROTECTED]>
> > To: "Freevo-Users" <[EMAIL PROTECTED]>
> > Sent: Wednesday, November 19, 2003 7:22 PM
> > Subject: Re: [Freevo-users] G400 - which driver?
> >
> >
> > > Thanks - after finally getting the basic tv-out working under 2.4.22
> > > (2.6.0-test9 gave problems) I can attack that next.
> > >
> > > Did you patch for the tripple buffering?
> > >
> > > The instructions for g400 tv-out under dfbmga seem quite old, are there
> > > any updated ones for kernel ver 2.4.22, directfb-0.9.19 and mplayer
> > > 1.0pre2? I'm wondering if some of the patches are included now.
> > >
> > > I'm running in greyscale at the moment as I'm using a G450 tv out cable,
> > > unless Matrox gets stock in soon I'm going to have to break out the
> > > soldering iron and make a cable :(
> > > Even in greyscale the quality is awesome compared to the neomagic chip
> in
> > > the old laptop I'd been using. Text is crisp rather than fuzzy. Once I
> > > have the correct cable I'll have to compare it to the tivo.
> > >
> > > On Wed, 19 Nov 2003 17:31:01 +0100, "Youri van Gorselen"
> > > <[EMAIL PROTECTED]> said:
> > > > I like dfbmga becoz u don't have to manually adjust the image position
> > > > with
> > > > fbset. And yes it's better quallity but also alot more work.
> > > >
> > > > Using pal @ 720x576 every other res i get a blue screen :( not sure
> what
> > > > the
> > > > problem is but i think it has something todo with fbset :(
> > > >
> > > > grtz,
> > > > Youri
> > > >
> > > > ----- Original Message -----
> > > > From: "Chris Griffiths" <[EMAIL PROTECTED]>
> > > > To: "Freevo-Users" <[EMAIL PROTECTED]>
> > > > Sent: Wednesday, November 19, 2003 4:49 PM
> > > > Subject: [Freevo-users] G400 - which driver?
> > > >
> > > >
> > > > > Which drivers are people using with G400's?
> > > > > I think dfbmga will provide best quality / lowest cpu usage - but to
> > get
> > > > > that I'm going to need to patch the kernel for irq blanking.
> > > > >
> > > > > Have people ran both with dfbmga and without and had a preference?
> > > > >
> > > > > What modelines are people using for NTSC resolution?
> > > > >
> > > > > Thanks,
> > > > > Chris
> > > > >
> > > > >
> > > > > -------------------------------------------------------
> > > > > This SF.net email is sponsored by: SF.net Giveback Program.
> > > > > Does SourceForge.net help you be more productive? Does it
> > > > > help you create better code? SHARE THE LOVE, and help us help
> > > > > YOU! Click Here: http://sourceforge.net/donate/
> > > > > _______________________________________________
> > > > > Freevo-users mailing list
> > > > > [EMAIL PROTECTED]
> > > > > https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This SF.net email is sponsored by: SF.net Giveback Program.
> > > > Does SourceForge.net help you be more productive? Does it
> > > > help you create better code? SHARE THE LOVE, and help us help
> > > > YOU! Click Here: http://sourceforge.net/donate/
> > > > _______________________________________________
> > > > Freevo-users mailing list
> > > > [EMAIL PROTECTED]
> > > > https://lists.sourceforge.net/lists/listinfo/freevo-users
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: SF.net Giveback Program.
> > > Does SourceForge.net help you be more productive? Does it
> > > help you create better code? SHARE THE LOVE, and help us help
> > > YOU! Click Here: http://sourceforge.net/donate/
> > > _______________________________________________
> > > Freevo-users mailing list
> > > [EMAIL PROTECTED]
> > > https://lists.sourceforge.net/lists/listinfo/freevo-users
> > >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SF.net Giveback Program.
> > Does SourceForge.net help you be more productive? Does it
> > help you create better code? SHARE THE LOVE, and help us help
> > YOU! Click Here: http://sourceforge.net/donate/
> > _______________________________________________
> > Freevo-users mailing list
> > [EMAIL PROTECTED]
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Freevo-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
